Bifen xts termites

Bifen is the line of bifenthrin based products distributed by Control Solutions. Bifenthrin is the active ingredient of the Bifen product line. Bifen products are generics and are usually less expensive as the generic manufacturer can reap the benefits of original research without having to invest large sums of money.

Bifen I/T is a concentrate of 7.9% bifenthrin as a concentrate which is measured and added to water to form an emulsion, or mix of active ingredient and water. I/T is for β€œβ€insecticide and termiticide”” and works on an array of pests. It can be measured for smaller quantities of dilutions. Bifen I/T comes in container sizes of 4 ounces, one pint, one quart, three quarts, and one gallon.

Bifen L/P is a granule which uses a sand base for perimeter and lawn applications. The bifenthrin concentration is 0.2% and can be spread using a hand spreader or lawn spreader. This product is mostly for general pests but bifenthrin in the soil may contribute to termite control using this product but it is not designed especially for termites. This product comes in a 25 pound bag.

Bifen Lawn and Perimeter is a 0.1% bifenthrin granule product. This has been replaced by Bifen L/P but current stocks can be used until exhausted. Bifen Lawn and Perimiter come in 10 and 25 pound bags.

Bifen XTS is a concentrated bifenthrin product which is a versatile termiticide and insecticide. The Bifen XTS manufacturer explains that XTS is the best bifenthrin residual available. It contains a concentrated amount of bifenthrin of 25.1% and comes in one gallon containers.

Bifenthrin products are used for termite control, both in new construction and in post construction for existing homes. Since it is less expensive than other termiticides, it is competitive with other products.

www.termite-control.com

Bifen XTS Insectic >

Features and Specifications

Active Ingredient(s) Bifenthrin 25.1%
Pest Control Kills: Termites, Ants, Carpenter Ants, Wood Infesting Beetles, Bees, Wasps, Hornets, Yellow-Jackets, Armyworms, Billbugs, Chinch Bugs, Crane Flies, Crickets, Cutworms, Earwigs, Fall Webworms, Fleas, Grasshoppers, Mites, Mole Crickets, Sod Webworms, Spittlebugs, Ticks, Fire Ants, Japanese Beetles
Sale Prohibited AK, IN, IA, MA, CA, CT, HI, NY, VT,
Shipping Rate Free

How Bifen XTS Insecticide Works

Bifen XTS Insecticide for Termites gets its name from the active ingredient bifenthrin. This synthetic chemical emulates a naturally occurring substance known as pyrethrin found in chrysanthemums, which works to protect the flowers in the wild. Bifenthrin doesn’t immediately knock down the insects. Rather, it works gradually upon contact or ingestion and allows social insects to spread it throughout the colony. Because it doesn’t repel the insects, pests like termites and ants come into contact with the ingredient unknowingly and die over time as a result.

Where to Use Bifen XTS Insecticide

Use Bifen XTS Insecticide in both residential and commercial areas where insects enter buildings or breed. With its water-resistant formula, Bifen XTS stays where you apply it for months, providing total control against invasive insects such as carpenter ants and carpenter bees. It also works to keep out spiders in barns and utility sheds. Other application sites for use include areas near or around:

  • Foundations
  • Patios
  • Lawns
  • Building perimeters
  • Apartments
  • Fence rows

What is Bifen XTS Insecticide Used For

Bifen XTS insecticide works as an effective pre- and post-construction termite treatment and also kills cockroaches and soil-dwelling pests beneath slabs. It knocks out entire termite and ant colonies and targets stinging insects such as yellow jackets and wasps. You can also use Bifen XTS to eliminate:

  • Armyworms
  • Billbugs
  • Centipedes
  • Chinch bugs
  • Earwigs
  • Fleas (adults and larvae)
  • Mole crickets
  • Mosquitoes
  • Scorpions

Use Bifen XTS Insecticide for eliminating citrus thrips, leaf miners, spider mites and twig borers and protecting plants in greenhouses and gardens. It also eradicates sowbugs, weevils and leaf hoppers in residential and commercial turfgrass.

Bifen XTS Insecticide Features and Benefits

  • Provides residual, long-lasting control over many different pests
  • Resists rainfall and irrigation
  • Nonrepellent formula to target insects over time
  • Works for both curative and preventative pest control

Treat Termites and More With Bifen XTS Insecticide

Protect turfgrass, ornamentals and shrubs from damaging insects with Bifen XTS Insecticide . Its active ingredient targets pests above and below the ground and prevents them from chewing through foundations, trees, fences and more. It also protects plant-damaging insects like thrips and spider mites, keeping your landscape bright green and healthy. When termites, ticks, spiders and other pests invade your property, take quick and effective action with Bifen XTS insecticide

DIRECTIONS FOR USE:

It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulations.

For additional information on this product please reference the CDMS label database listed below

SDS/Labels

Not For Sale AK, IN, IA, MA, CA, CT, HI, NY, VT,
Active Ingredient(s) Bifenthrin 25.1%
Used For Kills: Termites, Ants, Carpenter Ants, Wood Infesting Beetles, Bees, Wasps, Hornets, Yellow-Jackets, Armyworms, Billbugs, Chinch Bugs, Crane Flies, Crickets, Cutworms, Earwigs, Fall Webworms, Fleas, Grasshoppers, Mites, Mole Crickets, Sod Webworms, Spittlebugs, Ticks, Fire Ants, Japanese Beetles
Manufacturer Control Solutions
Shipping Free

How Bifen XTS Insecticide Works

Bifen XTS Insecticide for Termites gets its name from the active ingredient bifenthrin. This synthetic chemical emulates a naturally occurring substance known as pyrethrin found in chrysanthemums, which works to protect the flowers in the wild. Bifenthrin doesn’t immediately knock down the insects. Rather, it works gradually upon contact or ingestion and allows social insects to spread it throughout the colony. Because it doesn’t repel the insects, pests like termites and ants come into contact with the ingredient unknowingly and die over time as a result.

Where to Use Bifen XTS Insecticide

Use Bifen XTS Insecticide in both residential and commercial areas where insects enter buildings or breed. With its water-resistant formula, Bifen XTS stays where you apply it for months, providing total control against invasive insects such as carpenter ants and carpenter bees. It also works to keep out spiders in barns and utility sheds. Other application sites for use include areas near or around:

  • Foundations
  • Patios
  • Lawns
  • Building perimeters
  • Apartments
  • Fence rows

What is Bifen XTS Insecticide Used For

Bifen XTS insecticide works as an effective pre- and post-construction termite treatment and also kills cockroaches and soil-dwelling pests beneath slabs. It knocks out entire termite and ant colonies and targets stinging insects such as yellow jackets and wasps. You can also use Bifen XTS to eliminate:

  • Armyworms
  • Billbugs
  • Centipedes
  • Chinch bugs
  • Earwigs
  • Fleas (adults and larvae)
  • Mole crickets
  • Mosquitoes
  • Scorpions

Use Bifen XTS Insecticide for eliminating citrus thrips, leaf miners, spider mites and twig borers and protecting plants in greenhouses and gardens. It also eradicates sowbugs, weevils and leaf hoppers in residential and commercial turfgrass.

Bifen XTS Insecticide Features and Benefits

  • Provides residual, long-lasting control over many different pests
  • Resists rainfall and irrigation
  • Nonrepellent formula to target insects over time
  • Works for both curative and preventative pest control

Treat Termites and More With Bifen XTS Insecticide

Protect turfgrass, ornamentals and shrubs from damaging insects with Bifen XTS Insecticide . Its active ingredient targets pests above and below the ground and prevents them from chewing through foundations, trees, fences and more. It also protects plant-damaging insects like thrips and spider mites, keeping your landscape bright green and healthy. When termites, ticks, spiders and other pests invade your property, take quick and effective action with Bifen XTS insecticide

DIRECTIONS FOR USE:

It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulations.

For additional information on this product please reference the CDMS label database listed below

www.pedchem.com

Bifen XTS Insecticide Termiticide

32 Oz Quart Bottle

NOT FOR SALE TO: AK, IN, IA, MA, NY

> Product Information Page

FREE SHIPPING
AND
5% SAVINGS
On Your Order!

Coupon Code – 190114

Limited Time Offer.
Offer Ends July 31, 2019.
No Other Discounts Apply.

Bifen XTS Insecticide/Termiticide

Bifen XTS Insecticide/Termiticide is an oil based insecticide containing 25.1% Bifenthrin. It provides water resistent, long-lasting residual control!

Bifen XTS Insecticide/Termiticide Features:
* Provides long residual activity for improved pest control
* Fast-acting synthetic pyrethroid with low odor and quick knock down
* Controls over 75 unwanted pests including termites, ants, and surface feeding insects
* May be used as pre-treat and post-treat termiticide, general insecticide and all turf and ornamental use sites

Bifen XTS Insecticide/Termiticide Uses/Applications:
Application Rate: Use a 0.06% dilution for subterranean termites. For other pests on the label use specific listed rates.

Mixing Directions: Mix the termiticide use dilution in the following manner: Fill tank ΒΌ to Β½ full. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through hose. Add appropriate amount of Bifen XTS. Add remaining amount of water. Let pump run and allow recirculation through the hose for 2-3 minutes. Bifen XTS may also be combined into full tanks of water. If combined into full tanks of water, allow sufficient time for agitation and/or recirculation to ensure consistency of the dilution. To prepare a 0.06% water dilution, ready to use, dilute 1 quart of Bifen XTS with 99.75 gallons of water.

Bifen XTS Insecticide/Termiticide Target Pests:
Controls: Termites, ants, carpenter ants, old house borers, powder post beetles, armyworms, billbugs, chinch bugs, crane flies, crickets, cutworms, earwigs, fall webworms, fleas, grasshoppers, mites, mole crickets, sod webworms, spittlebugs, ticks, aphids, bagworms, black vine weevil, brown soft scales, broad mites, budworms, centipedes, clover mites, flea beetles, fungus gnats, lace bugs leafhoppers, leaf feeding caterpillars, mealybugs, millipedes, mole crickets, orchid weevils, pillbugs, pine needle scales, plant bugs, San Jose scales, sowbugs, spiders, spittlebugs, tent caterpillars, tip moths, weevils, whiteflies, citrus thrips, beet armyworm, diaprepes, European red mite, leafrollers, spider mites, thrips, twig borers, and many more!

Bifen XTS Insecticide/Termiticide Active Ingredients:
Bifenthrin. 25.1%

NOT FOR SALE IN: AK, IN, IA, MA, NY

Bifen XTS Insecticide/Termiticide is an oil based insecticide containing 25.1% Bifenthrin. It provides water resistent, long-lasting residual control! rn

Bifen XTS Insecticide/Termiticide Features:
* Provides long residual activity for improved pest control
* Fast-acting synthetic pyrethroid with low odor and quick knock down
* Controls over 75 unwanted pests including termites, ants, and surface feeding insects
* May be used as pre-treat and post-treat termiticide, general insecticide and all turf and ornamental use sites

Bifen XTS Insecticide/Termiticide Uses/Applications:
Application Rate: Use a 0.06% dilution for subterranean termites. For other pests on the label use specific listed rates.

Mixing Directions: Mix the termiticide use dilution in the following manner: Fill tank u00bc to u00bd full. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through hose. Add appropriate amount of Bifen XTS. Add remaining amount of water. Let pump run and allow recirculation through the hose for 2-3 minutes. Bifen XTS may also be combined into full tanks of water. If combined into full tanks of water, allow sufficient time for agitation and/or recirculation to ensure consistency of the dilution. To prepare a 0.06% water dilution, ready to use, dilute 1 quart of Bifen XTS with 99.75 gallons of water.

Bifen XTS Insecticide/Termiticide Target Pests:
Controls: Termites, ants, carpenter ants, old house borers, powder post beetles, armyworms, billbugs, chinch bugs, crane flies, crickets, cutworms, earwigs, fall webworms, fleas, grasshoppers, mites, mole crickets, sod webworms, spittlebugs, ticks, aphids, bagworms, black vine weevil, brown soft scales, broad mites, budworms, centipedes, clover mites, flea beetles, fungus gnats, lace bugs leafhoppers, leaf feeding caterpillars, mealybugs, millipedes, mole crickets, orchid weevils, pillbugs, pine needle scales, plant bugs, San Jose scales, sowbugs, spiders, spittlebugs, tent caterpillars, tip moths, weevils, whiteflies, citrus thrips, beet armyworm, diaprepes, European red mite, leafrollers, spider mites, thrips, twig borers, and many more!

Bifen XTS Insecticide/Termiticide Active Ingredients:
Bifenthrin. 25.1%

NOT FOR SALE IN: AK, IN, IA, MA, NY

32 Oz Quart Bottle rn

NOT FOR SALE TO:u00a0AK, IN, IA, MA, NY “,”available_now”:””,”available_later”:””,” >

www.epestcontrol.com

Bifen XTS 25.1% – Gallon

CSI – Bifen XTS 25.1% – Gallon

Bifen XTS is an oil based insecticide that contains 25.1% bifenthrin and provides water resistant, long lasting residual control. Broad-label Bifen XTS is an excellent choice for PMP’s and customers looking for a high performance, cost effective Bifenthrin product for outdoor perimeter pest control, turf and ornamentals, or pre and post construction termite treatment.

Provides long residual activity for improved pest control

Fast-acting synthetic pyrethroid with low odor and quick knock down

Controls over 50 unwanted pests including termites, ants and surface feeding insects

May be used as pre- and post-treat termiticide, general insecticide and all turf and ornamental use sites

Product Type: Professional

Use Sites: outdoor perimeter pest control, turf and ornamentals, or pre- and post-construction termite treatment

Effective Against: Ants, Armyworms, Billbugs, Chinch Bugs, Crane Flies, Crickets, Cutworms, Earwigs, Fall Webworms, Fleas (adults, larvae), Grasshoppers, Mites, Mole Crickets, Sod Webworms, Spittlebugs, Ticks, Termites

Active Ingredients: Bifenthrin 25.1%

States Registered: AL, AR, AZ, CA, CO, CT, DC, DE, FL, GA, HI, ID, IL, KS, KY, LA, MD, ME, MI, MN, MO, MS, MT, NC, ND, NE, NH, NJ, NM, NV, NY, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VA, VT, WA, WI, WV, WY

Active Ingredient:

Target pests:

Termites, Ants, Carpenter Ants, Fire Ants, Beetles, Chinch Bugs, Crane Flies, Crickets, Fleas (adults, larvae), Grasshoppers, Japanese Beetles, Mites, Mole Crickets, Sod Webworms, Ticks, Termites and others
* See label for complete list

For use in:

Residential & Commercial Perimeter Control: Turf-grass and Ornamentals, and Pre & Post Construction Termite Treatment
* See label for complete list

Application:

0.32 – 0.64 oz. per gallon of water (32 oz. to 100 gallons of water)

Write a review

Your Review: Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

www.athomepestcontrol.com

Control Solutions, Inc.

Share This Article

Product Description

Bifen XTS is an oil based insecticide that contains 25.1% bifenthrin and provides water resistant, long lasting residual control. Broad-label Bifen XTS is an excellent choice for PMP’s and customers looking for a high performance, cost effective Bifenthrin product for outdoor perimeter pest control, turf and ornamentals, or pre and post construction termite treatment.

Active Ingredient: Bifenthrin – 25.1%
Target pests: Termites, Ants, Carpenter Ants, Fire Ants, Beetles, Chinch Bugs, Crane Flies, Crickets, Fleas (adults, larvae), Grasshoppers, Japanese Beetles, Mites, Mole Crickets, Sod Webworms, Ticks, Termites and others
* See label for complete list
For use in: Residential & Commercial Perimeter Control: Turf-grass and Ornamentals, and Pre & Post Construction Termite Treatment
* See label for complete list
Application: 0.32 – 0.64 oz. per gallon of water (32 oz. to 100 gallons of water)
* See label for complete application instructions
Formulation: Professional Product
NOT FOR SALE TO: CT, MA, NY
Shipping Weight: 2.20 lbs
Manufactured By: Control Solutions
UPC: 072693444102

Product Documents

  • Bifen XTS Label
  • Bifen XTS SDS

GENERAL INFORMATION

Bifen XTS prevents and controls termite infestations in and around structures and constructions.

Bifen XTS used in and around structures and building construction will prevent and control termite infestations.

To institute a barrier between the wood and the termites in the soil, the chemical dilution must be effectively dispersed in the soil. It is important to remove unnecessary materials that contain cellulose and wood from around foundation walls, crawl spaces (inside of structure), and porches, and fix damaged plumbing and construction grade in order to deny termite access to moisture. Treat the soil around untreated structural wood in contact with soil.

APPLICATION

Subterranean Termite Control

* See label for complete application instructions

Lawns:

Bifen Xts may be used as a broadcast treatment. To accomplish uniform control when applying to dense grass foliage, use volumes of up to 10 gallons per 1000 square feet. For low water volume usage, less than 2 gallons/1000 square feet, addition of a non-ionic or silicone based surfactant (0.25% v/v) is recommended, as is immediate irrigation of treated area with at least 0.25 inches of water following application to ensure efficacy of sub-surface pests including mole crickets.

Ornamentals and Trees:

dilute 0.26 to 1.28 fl. oz. of Bifen Xts per 10 gallons of water and apply at the rate of 10 gallons per 4,356 square feet. One gallon of finish spray will treat 435 sq. ft. If a higher volume application is needed to sufficiently cover the plant canopy, Bifen Xts can be diluted in large volumes of water and applied through low volume equipment as long as the maximum label rate (1.28 fluid ounces per 4,356 square feet) is not exceeded.

WARNING: This product can expose you to chemicals including naphthalene which is known to the State of California to cause cancer.

diyprovenpestcontrol.com

Share:
No Comments

Leave a Reply

Your e-mail will not be published. All fields are required.