Vectra 3D tick drops: instructions and reviews

Больше, чем любовь.

Вы понимаете друг друга без слов? Вы заботитесь о своей собаке и готовы многое для неё сделать? Если это так, то вы настоящий любитель собак. Собака дарит Вам свою любовь и преданность, доверяет Вам свою жизнь. Защитите свою собаку от насекомых-паразитов с Вектрой 3D. Защитите свою семью от заболеваний, переносчиками которых могут быть насекомые-паразиты.

Защити свою любовь

Защита от блох и клещей

Больше, чем защита

Владельцы собак очень любят своих питомцев и готовы сделать всё, чтобы защитить свою собаку от насекомых-паразитов. Используйте Вектру 3D — эффективное средство от эктопаразитов широкого спектра действия. Ветеринарные врачи рекомендуют.

Сравни и сделай правильный вывод.

Выбирая препарат от насекомых-паразитов, обращайте внимание на спектр действия и на репеллентные (отпугивающие) свойства препарата. Нет укуса — нет заражения.

Вектра 3D®

Другой препарат

Вектра 3D в течение 30 дней быстро уничтожает и отпугивает 6 видов насекомых-переносчиков заболеваний, а препарат на основе спиносада уничтожает только взрослых блох.

Вектра 3D®

Другой препарат

Вектра 3D в течение 30 дней отпугивает 6 видов насекомых-переносчиков заболеваний, а препарат на основе фипронила и метапрена не обладает репеллентными (отпугивающими) свойствами.

ОТПУГИВАНИЕ

Защити свою собаку

Важно не только уничтожить паразитов на собаке, но и отпугнуть насекомых, предотвращая укус, при котором может произойти заражение животного опасными инфекционными забоеваниями.

После нанесения Вектра 3D накапливается в эпидермисе, волосяных луковицах и сальных железах собаки, формируя защитный барьер, при контакте с которым блохи, клещи и другие насекомые-паразиты погибают. Вектра 3D проникает в организм паразита через хитин и кожные покровы при контакте. Паразит погибает, не успевая укусить собаку. Комары чувствуют действующие вещества Вектры 3D и в 80% случаев не садятся на собаку.

Защитите свою собаку от укусов насекомых-паразитов и от повторного заражения. Регулярно применяя Вектру 3D, вы снижаете риск заражения трансмиссивными заболеваниями. Ветеринарные врачи рекомендуют Вектру 3D.

ВЕКТРА 3D ОТПУГИВАЕТ БЛОХ, КЛЕЩЕЙ И ДРУГИХ ПАРАЗИТОВ

Нелетающие паразиты погибают при контакте с Вектрой 3D

www.vectrapet.com

U.S. Food and Drug Administration

Flea bites may be more than an itchy annoyance to some dogs and cats. They can cause flea allergy dermatitis—an allergic reaction to proteins in flea saliva. And a pet’s constant scratching can cause permanent hair loss or other skin problems. Fleas feasting on your pet’s blood can lead to anemia and, in rare cases, death.

Ticks can also harm your pet, transmitting infections such as Lyme disease. And pets can bring ticks into the home, exposing you and your family to illness from a tick bite.

Hundreds of pesticides, repellents, and growth inhibitors are available to protect your pet from flea and tick bites. Some of these products are available only from a veterinarian; others can be bought over the counter.

Flea and tick products range from pills given by mouth to collars, sprays, dips, shampoos, powders, and “spot-ons,” liquid products squeezed onto the dog’s or cat’s skin usually between the shoulder blades or down the back. A few spot-on products are available for flea control in ferrets, and fly and tick control in horses.

Pet owners need to be cautious about using flea and tick products safely, says Ann Stohlman, V.M.D., a veterinarian in the Food and Drug Administration’s (FDA) Center for Veterinary Medicine. “You need to take the time to carefully read the label, the package insert, and any accompanying literature to make sure you’re using the product correctly.”

Regulation of Flea and Tick Products

Flea and tick products for pets are regulated by either FDA or the Environmental Protection Agency (EPA).

FDA is responsible for regulating animal drugs; however, some products to control external parasites come under the jurisdiction of EPA. FDA and EPA work together to ensure adherence to all applicable laws and regulations. In general, flea and tick products that are given orally or by injection are regulated by FDA.

Before an animal drug is allowed on the market, FDA must “approve” it. Before a pesticide can be marketed, EPA must “register” it.

Both agencies base their decision on a thorough review of detailed information on the product’s safety and effectiveness provided by the manufacturer or other product sponsor. The sponsor must show that the drug or pesticide meets current safety standards to protect

  • the animal
  • people in contact with the animal
  • the environment

The sponsor must also show that the drug or pesticide produces the claimed effect, and the product must carry specific labeling so that it can be used according to the directions and precautions.

After a product is allowed on the market, manufacturers are required by law to report any side effects of their flea or tick products to the regulating agency.

Caution with Spot-On Products

In spring 2009, EPA noticed an increase in pet incidents being reported involving spot-on pesticide products for pets. EPA received a large amount of bad pet reaction information reported to the companies that hold registrations for these products. EPA formed a veterinarian team with the Food and Drug Administration’s Center for Veterinary Medicine (CVM) and Canada’s Pest Management Regulatory Agency (PMRA) to review this information. The team studied incidents involving cats and dogs, looked at the ingredients, studied labeling, and discussed data needs for the future to improve analyses and regulation.

Based on its analysis, EPA determined that some changes need to be made in how spot-on products are regulated, how companies report data on pet incidents, and how packages are labeled for cats, dogs, and size of animals to ensure the safety of these products. Based on reported incidents, EPA also concluded that many but not all pet incidents took place because the products were misused.

In September 2011, EPA required the following actions in response to the analysis of spot-on treatments:

  • Requiring manufacturers of spot-on pesticide products to improve labeling, making instructions clearer to prevent product misuse, including repeating the word “dog” or “cat” and “only” throughout the directions for use and applicator vial, and detailed side effect language.
  • Requiring clear marking to differentiate between dog and cat products and more precise label instructions to ensure proper dosage per pet weight.
  • Restricting the use of any inert ingredients that EPA finds may contribute to incidents.
  • Launching a consumer information campaign to explain new label directions and to help users avoid making medication errors.
See also:  Why Ticks Are Attracted to Humans

Spot-on flea and tick products can be effective treatments, and many people use the products with no harmful effects to their pets. EPA does not advise pet owners to stop using spot-ons, but asks them to use caution and make informed decisions when selecting treatment methods.

EPA advises pet owners to

  • carefully follow label directions and monitor their pets for any signs of a bad reaction after application, particularly when using these products for the first time
  • talk to a veterinarian about responsible and effective use of flea and tick products

When to Treat

It’s best to treat your pet at the beginning of flea and tick season, says Stohlman. The length of flea season, which peaks during warm weather months, varies depending on where you live. “It can last four months in some places, but in other places, like Florida, fleas can live all year long,” says Stohlman. And fleas can live inside a warm house year-round no matter where you live.

Ticks are found in some places year-round. The Centers for Disease Control and Prevention report that in most parts of the United States, the greatest chance of infection by a tick bite is spring and summer.

Tips for Using Flea and Tick Products

  • Read the label carefully before use. If you don’t understand the wording, ask your veterinarian or call the manufacturer. “Even if you’ve used the product many times before,” says Stohlman, “read the label because the directions or warnings may have changed.”
  • Follow the directions exactly. If the product is for dogs, don’t use it on cats or other pets. If the label says use weekly, don’t use it daily. If the product is for the house or yard, don’t put it directly on your pet.
  • Keep multiple pets separated after applying a product until it dries to prevent one animal from grooming another and ingesting a drug or pesticide.
  • Talk to your veterinarian before using a product on weak, old, medicated, sick, pregnant, or nursing pets, or on pets that have previously shown signs of sensitivity to flea or tick products.
  • Monitor your pet for side effects after applying the product, particularly when using the product on your pet for the first time.
  • If your pet experiences a bad reaction from a spot-on product, immediately bathe the pet with mild soap, rinse with large amounts of water, and call your veterinarian.
  • Call your veterinarian if your pet shows symptoms of illness after using a product. Symptoms of poisoning include poor appetite, depression, vomiting, diarrhea, or excessive salivation.
  • Do not apply a product to kittens or puppies unless the label specifically allows this treatment. Use flea combs to pick up fleas, flea eggs, and ticks on puppies and kittens that are too young for flea and tick products.
  • Wash your hands immediately with soap and water after applying a product, or use protective gloves while applying.
  • Store products away from food and out of children’s reach.

Source: FDA and CDC

Reporting Problems

Keep the product package after use in case side effects occur. You will want to have the instructions available, as well as contact information for the manufacturer.

  • To report problems with spot-on flea or tick products, contact the National Pesticide Information Center (NPIC) at 1-800-858-7378.
  • To report problems with FDA approved flea or tick drug products, contact the drug manufacturer directly (see contact information on product labeling) or report to FDA’s Center for Veterinary Medicine on a Form FDA 1932a.
  • If your pet needs immediate medical care, call your local veterinarian, a local animal emergency clinic, or the National Animal Poison Control Center at 1-888-426-4435. The NAPCC charges a fee for consultation.

www.fda.gov

Hartz UltraGuard Plus Flea & Tick Drops for Dogs and Puppies (16-30 lbs.)

Hartz UltraGuard Plus Flea & Tick Drops for Dogs and Puppies (16-30 lbs.)

for Dogs and Puppies weighing 16-30 lbs.

Mosquitoes — Flea Eggs

for up to 30 days

fleas and ticks for up to 30 days

3 Monthly Treatments

Pro-cision Flo ® applicator for Direct-to-Skin application

KEEP OUT OF REACH OF CHILDREN

Hartz UltraGuard Plus Flea & Tick Drops for Dogs and Puppies (16-30 lbs.) Caution

Active Ingredients

DO NOT USE ON CATS

— Kills all stages of the flea life cycle

For more information, call our experts at 1-800-275-1414.

READ ENTIRE LABEL BEFORE EACH USE.

USE ONLY ON DOGS OR ON PUPPIES 12 WEEKS OF AGE OR OLDER.

DO NOT USE ON DOGS OR PUPPIES WEIGHING 4 LBS. OR LESS.

Precautionary Statements

Hazards To Humans

Hartz UltraGuard Plus Flea & Tick Drops for Dogs and Puppies (16-30 lbs.) Caution

Causes moderate eye irritation. Avoid contact with eyes or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum or using tobacco.

Hazards To Domestic Animals

DO NOT USE ON CATS OR KITTENS.

Do not use on puppies less than 12 weeks old. Do not use this product on debilitated, aged, medicated, pregnant or nursing animals or on animals known to be sensitive to pesticide products without first consulting a veterinarian. Sensitivity, such as slight transitory redness of the skin at the site of application, may occur after using ANY pesticide product for pets. If signs of sensitivity occur, bathe your pet with mild soap, rinse with large amounts of water, and consult a veterinarian immediately.

Environmental Hazards

This product is toxic to fish.

First Aid

If in eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. HOT LINE NUMBER: Have the product container or label with you when calling a poison control center, doctor or veterinarian, or going for treatment. For additional information on this pesticide product (including health concerns, medical emergencies or pesticide incidents), you may call 1-800-275-1414.

Directions For Use

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

READ ENTIRE LABEL BEFORE EACH USE.

USE ONLY ON DOGS OR ON PUPPIES 12 WEEKS OF AGE OR OLDER.

DO NOT USE ON DOGS OR PUPPIES WEIGHING 4 LBS. OR LESS.

1. Remove one applicator tube from the package and hold in an upright position pointed away from your face.

2. Twist dispensing tip clockwise about 1/2 turn while pushing down to break the tube’s seal. Do not remove the dispensing tip.

3. Position the dispensing tip on the dog’s back between the shoulder blades. Use the dispensing tip of the tube to part the dog’s hair so that the product will be applied at skin level. Begin squeezing out the contents of the tube to form a stripe as you move from the shoulder blades along the dog’s back to the base of the tail.

4. Repeat every month.

Storage And Disposal

Do not contaminate water, food, or feed by storage and disposal.

PESTICIDE STORAGE: Keep this product in its tightly closed original container, when not in use. Store in a cool, dry (preferably locked) area that is inaccessible to children and animals. PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.

See also:  How to Get Rid of Insects on Herbs, Home Guides, SF Gate

CONTAINER DISPOSAL: Non-refillable container. Do not reuse or refill container. If empty: Offer for recycling if available. If partly filled: Call your local solid waste agency for disposal instructions. Never place unused product down any indoor or outdoor drain.

EPA Reg. No. 2596-150

EPA Est. No. 2596-OH-1

Hartz ® and other trademarks are trademarks of The Hartz Mountain Corporation.

Made by The Hartz Mountain Corporation, 400 Plaza Drive, Secaucus, NJ 07094

Contains 3 Tubes, each 0.04 fl. oz. (1.3 ml)

Telephone: 201-271-4800
Technical Information: 800-275-1414
Fax: 201-271-0357
Website: www.hartz.com
Every effort has been made to ensure the accuracy of the Hartz UltraGuard Plus Flea & Tick Drops for Dogs and Puppies (16-30 lbs.) information published above. However, it remains the responsibility of the readers to familiarize themselves with the product information contained on the US product label or package insert.

Copyright © 2020 Animalytix LLC. Updated: 2020-04-01

www.drugs.com

Vectra 3D 1.6ml Small Dog 4-10kg

Vectra 3D for dogs 1.6ml 4-10kg

Vectra 3D for dogs provides fast protection against fleas and ticks…without the bite.

It is available in packs of 3 pipettes.

The unique combination of active ingredients in Vectra 3D kills fleas in just 2 hours* and also prevents them feeding. The fleas don’t even need to bite your pet – they are killed on contact with the active ingredients.

On top of this, Vectra 3D will kill the eggs and larvae that live in your house to prevent new adult fleas from developing. Plus it lasts for a full month!

Vectra 3D will repel and kill ticks 24h after it has been applied and provide protection for your dog for a full month, no matter where you take him. Vectra 3D also repels other biting insects such as sand flies, mosquitoes and stable flies for a month.

The unique ‘line-on’ application method and easy to use pipette means the product gets to work quickly and may be less sticky and messy than more traditional spot-on methods. For more information, please contact your vet. Warning: Vectra 3D should not be used on cats.

*For dogs that have been treated previously with the product.

If you see the «prescription required» sign next to an item you’d like to order, it means the item can only be issued with a prescription. While you can add these items to your shopping cart and pay for them along with other non-prescription products, we can’t dispatch them until we’ve received a prescription.

Please view our Delivery and Coronavirus pages for the latest updates.

Light (usually non-food) orders under £29 are charged £2.99 postage. Heavy (typically food) orders under £29 are charged £4.49 postage.

For Light items (under 2kg) our standard method is Royal Mail Second Class (there are a few exceptions, so if in doubt check our Delivery page).

To get it faster you can upgrade Light items to Royal Mail 1st Class or a Guaranteed Courier service, Saturday Courier or even before 12 noon services. There’s a small fee, but if you’re in a hurry they are worth considering. To ensure you get your courier order as quickly as possible, please place your order before 12 Noon Monday to Thursday. There is no standard Saturday courier delivery.

Heavy items weighing 2kg and more are sent via courier. Heavy items ordered after 12 Noon Friday, or anytime Saturday and Sunday will be processed on a normal working day.

Please note that if you are purchasing a mix of Light and Heavy items at the same time, these will be sent separately. The Heavy items being sent by Courier, the Light items by Royal Mail Second Class.

Refrigerated items are only dispatched by courier Monday to Thursday to ensure the item remains cool.

All exceptions to these guidelines are noted in the product description.

For more information, view our Delivery page.

www.petdrugsonline.co.uk

Pet Illnesses and Deaths Prompt Lawsuits Against Hartz and Other Flea and Tick Product Makers

March 9 2010 — by Lucy Campbell

Five New Jersey Companies are named as separate defendants in the lawsuits, specifically Secaucus-based Hartz Mountain Corp., Summit VetPharm LLC of Rutherford, Morristown-based Bayer Healthcare LLC, Merck & Co. Inc. of Whitehouse Station and Sanofi-Aventis Inc. of Bridgewater.

The most recent lawsuit filed last week by five pet owners against Hartz Mountain and Summit VetPharm, alleges that the flea or tick treatments made by these two companies contained Pyrethrin, or a synthetic version of the chemical Pyrethroids, which are «known to poison animals.»

The products named include Hartz Ultra Guard flea and tick drops and Summit VetPharm’s Vectra 3d. The companies are accused of negligence, violating New Jersey’s consumer fraud law and liability for creating an «unreasonably dangerous product.»

In one lawsuit, a man from California saw his Scottish Terrier, Duffy, die three days after he treated him with Hartz flea and tick drops. Rick Parsons took Duffy to the veterinarian’s facility because he did not appear well. Duffy died at the Vet’s office that day and the Vet reportedly said the death was due to a «reaction to the insecticide.»

The suits reportedly states that Parsons contacted Hartz, which reviewed the case and denied any responsibility, saying that the dog’s death was due to «underlying health problems.» The suit goes on to state «in 2008 alone, there were approximately 48,000 reports of adverse events from the spot-on or squeeze-on products including pyrethrins, Permethrin, or other pyrethroids.»

According to a media report, the U.S. Environmental Protection Agency (EPA), which regulates the products, has seen a «sharp increase in adverse consequences» resulting from these products.

«Adverse reactions reported range from mild effects such as skin irritation to more serious effects such as seizures, and in some cases, death of the pet,» the advisory said.

The lawsuits are reportedly seeking class action status.

www.bigclassaction.com

3D Imaging for Face & Neck

A perfect fit for today’s aesthetic practice, the VECTRA® M3 delivers extraordinary performance in an advanced 3D imaging solution. High resolution capture assures photorealistic rendering of the finest details, while the elegant design complements any setting.

Communicate the Possibilities

Engage in a streamlined, persuasive consultation as you view the three-dimensional image from any angle, zoom in for a closer look, superimpose the simulation over the pre-op, compare side-by-side, or fade between the two.

Differentiate Your Practice

Increased patient referrals and drive greater media exposure with state-of-the-art assessment tools and realistic 3D results.

Communicate the Possibilities

Use your patient’s own image to explore possible outcomes, educate them about their options, explain limitations, and set appropriate expectations.

Close More Complementary Procedures

Show the difference between the likely outcome of a single procedure or by combining multiple procedures.

Increase Patient Satisfaction

Visualize your patient’s expectations, arrive at a shared understanding of treatment objectives, and help your patient decide on the best possible treatment plan.

Sculpt the Dream

RBX®: Another Dimension

Canfield’s proprietary RBX® technology separates the unique color signatures of red and brown skin components for unequaled visualization of pre-treated skin conditions.

Detailed Facial Diagrams and Measurements

Accurate measurements help your patients visualize their current condition and simulated changes.

Measure Volume Difference

Automatically measure the volume difference and visualize the degree of contour change with a color distance map.

Markerless Tracking

Automated Markerless Tracking provides a dynamic assessment of skin surface changes. Skin surfaces are automatically aligned, tracked and mapped.

See also:  Home remedies to get rid of fleas on dogs ~ LORECENTRAL

Communicate the Complete Plan

Visualize your patient’s hopes and expectations. Quickly arrive at a shared understanding of objectives.

Close More Complementary Procedures

Demonstrate the difference between the likely outcome with only one or multiple procedures. With Face Sculptor® you can explore the possibilities and help your patient decide on the best possible treatment plan.

Print the Dream

When you’re finished, click the optional Print button to select what you wish to show on the printed report, including your practice information and selectable 2D views of pre-op and/or simulation.

Canfield Care® Available

Unlimited technical support, hardware warranty, training webinars, software upgrades and ViewMyConsult® access.

HIPAA Compliance

Canfield Imaging Systems is making every effort to develop software that integrates easily into a HIPAA-compliant practice and to assist our customers in complying with HIPAA.

VECTRA products and features are developed in collaboration with industry leading doctors.

The new dynamic in facial plastic surgery is facial contouring, and nothing demonstrates this better than VECTRA® 3D. Whether I’m using fillers or making large structural mass changes, VECTRA’s simulation, measurement and patient consultation tools offer the perfect imaging solution for my practice.

VECTRA® 3D imaging is the perfect tool to help facial plastic surgeons be more accurate in pre-op planning. The ability to critically analyze factors such as contour and volume allows me to accurately assess the expected results of procedures, and have meaningful, compelling consultations with my patients. These benefits apply to clinical research and reconstructive surgery as well as to the aesthetic practice.

I use VECTRA® 3D imaging for all of my consultations. Canfield’s Face Sculptor has made a tremendous impact on how I communicate with my patients. It allows me to make accurate simulations and more clearly discuss surgical goals in advance with the patient.

The very first day after VECTRA® was installed, a patient came in for a consultation. After viewing the simulated outcomes, the patient booked a surgery which literally paid for the entire system. It is this kind of result — right out of the box — that has gotten the attention of everyone in the practice.

VECTRA® 3D has made it possible for me to do simulations for rhinoplasty, chin augmentation and facial contouring. I can easily reshape the nose, pull in the jawline or change volumetric relationships in the midface. Because my patients have the opportunity to ask for changes or see the result from a different angle they are much more knowledgeable about what is achievable, what to expect and the number of steps it takes to achieve certain results. It makes a huge difference.

Related Products

VECTRA® H2

VECTRA® XT

VECTRA® H1

Tech Specs

Specifications

Capture System
  • 1.2 mm geometry resolution (triangle edge length)
  • 3.5 milliseconds capture time
  • On-board modular, intelligent flash units
  • Stereophotogrammetry technology
  • Floor stand
  • Stool
  • Dell computer and flat panel display
  • Download Dimensional Specifications (pdf)
Software
  • VECTRA® Capture Module
  • Face Sculptor®
  • RBX® image processing
  • VECTRA® 3D Analysis Module
  • Mirror® PhotoFile®
  • Mirror® PhotoTools®

Requirements

System Power
  • 100-120V AC, 50/60 Hz, 4.0A or
  • 220-240V AC, 50/60 Hz, 4.0A
Capture Computer
  • Configured and supplied by Canfield. Computers from other suppliers are not supported.
Consultation Computer Recommendations (not supplied)
  • Operating system:
    • Windows 10 Professional, 64 bit – (Recommended)
    • NOT SUPPORTED: Windows Home Edition and Windows VISTA
  • Processor: 2.2Ghz Quad Core i5, 7th Gen or higher (Intel i7 7th Gen or higher, recommended)
  • System memory (RAM): 16 GB or higher
  • Minimum 1 GB available disk space for installing application
  • Minimum 1 TB available disk space recommended for data
  • Graphics card:
    • 1 GB dedicated memory minimum (2 GB Highly Recommended)
    • Dedicated nVidia or AMD cards (nVidia Highly Recommended)
    • Driver: latest available
    • 3.0 or later Open GL
  • USB Ports: 2 dedicated ports (USB 2.0)
  • Display: 1920 x 1080 (4K monitors not currently optimized)
  • Microsoft Security Essentials anti-virus software recommended
  • Wired printers (recommended for speed)
  • 1 Gbps Ethernet connection for networking — Wifi not supported
Mirror iPad App (used for VECTRA 3D images)
  • Miminum support of 802.11n or later protocol by the intra-office Wi-Fi router
  • Requires iPad capable of running the current version of iOS
Server / Network Guidelines (not supplied — Minimum recommendations)
  • Windows Server 2008 R2 SP1 64-bit, Server 2012 64-bit or 2012 R2 64-bit, Server 2016 64-bit
  • Microsoft SQL Server 2008, 2008 R2, 2012 (Express edition is installed by default), 2016, 2017
  • 1 Gbps wired LAN connectivity (Wi-Fi not supported)
  • 1 Terabyte HDD, minimum. Space required is dependent upon patient volume, camera used, and settings.
  • RAID 1 — NOT SUPPORTED
  • Regularly scheduled backups are highly recommended.
Notes
  • We do not support using a server class OS as a workstation.
  • WAN Connectivity is NOT supported

Frequently Asked Questions

Face Sculptor will enhance your patient’s consultation experience, helping them visualize their hopes and expectations by;

  • communicating the possibilities as you demonstrate surgical and non-surgical facial procedures on a 3D image of your patient’s face, while arriving at a shared understanding of treatment objectives.
  • exploring the combined effects of complementary procedures, such as rhinoplasty and chin augmentation, improving your patient’s satisfaction, while also increasing the amount of procedures you perform.

This will increase conversion rates, help ensure post-surgery satisfaction and generate more patient referrals.

Yes. Face Sculptor may be run from a computer other than the one provided with your turn-key system. The high quality Face Sculptor images may require additional graphic card performance. Contact Canfield Imaging Systems to see if your computer is adequate for running Face Sculptor. If not, we can make recommendations for computers or upgrades best suited for this purpose.

Face Sculptor software comes as part of a complete turn-key solution suitable for professional Face Sculptor consultations. This solution includes the VECTRA High Resolution 3D Capture System, 3D Mirror software, computer, and one day of installation and training.

No. The VECTRA system includes lighting designed specifically for clinical photography, producing images without shadows and with color that matches the patient’s own skin tones. No additional lighting is necessary

2D images, saved from any angle of the 3D image, can be copied into a printable report for use during surgery. It is also possible to load the 3D image onto a PC located in the operating room, enabling the surgeon to use an electronic copy of the 3D image as a reference.

Yes. A patient initially interested in modifications to only one portion of their face, for instance their nose, can also be shown the effects of changes made to a complementary portion of the face such as their chin.

Several types of adjustments are provided to enable simulating most surgical and non-surgical procedures. Constrained and unconstrained tools are used to adjust the shape of the face, such as modifying the bridge of the nose, adding filler to the malar pad region and liposuction of the chin and neck. Additional skin texture tools are used to adjust surface changes, such as adding toxins, filling in nasolabial folds and skin resurfacing.

Face Sculptor software is very easy to use. Graphical instructions, easy adjustment sliders and intuitive software guide the user to ensure that realistic surgical models are easily created. Face Sculptor’s convenient viewing tools makes it easy to show your patient the likely outcome from any angle, as well as superimposed over the pre-op image or side-by-side.

Face Sculptor currently provides the ability to model in 3D several facial procedures, including;

  • Rhinoplasty
  • Chin augmentation
  • Chin liposuction
  • Injectables (fillers and toxins)
  • Face lifts
  • Lip augmentation

www.canfieldsci.com

Share:
No comments

Добавить комментарий

Your e-mail will not be published. All fields are required.

×
Recommend
Adblock
detector