Moisture and Mold Problems: Preventing and Solving Them in Your Home

Moisture and Mold Problems: Preventing and Solving Them in Your Home

In this Article

In this Article

In this Article

Whether it’s the slimy black spots on your shower curtain, the fuzzy white patches on your basement floor, or the slick orange film that forms on your kitchen drain, household mold is more than unsightly. In some cases, mold in your home can make you sick, especially if you have allergies or asthma.

Whether or not you’re allergic to molds, mold exposure can irritate your eyes, skin, nose, throat, and lungs. Here’s what you can do to combat mold problems, and take care of yourself and your home.

Mold Reactions: Who’s at Risk?

For people sensitive to mold, inhaling or touching mold spores can cause allergic reactions, including sneezing, runny nose, red eyes, and skin rash. People with serious mold allergies may have more severe reactions, including shortness of breath. In people with asthma who are allergic to mold, breathing in spores can also cause asthma attacks.

In addition to people with allergies and asthma, others who may be more sensitive to the effects of mold include:

  • Infants and children
  • The elderly
  • People whose immune systems are compromised due to HIV infection, cancer, liver disease, or chemotherapy
  • People with chronic lung disease

What Is Mold?

Mold is a type of fungus that consists of small organisms found almost everywhere. They can be black, white, orange, green, or purple. Outdoors, molds play an important role in nature, breaking down dead leaves, plants, and trees. Molds thrive on moisture and reproduce by means of tiny, lightweight spores that travel through the air. You’re exposed to mold every day.

In small amounts, mold spores are usually harmless, but when they land on a damp spot in your home, they can start to grow. When mold is growing on a surface, spores can be released into the air where they can be easily inhaled. If you’re sensitive to mold and inhale a large number of spores, you could experience health problems.

Where Do Molds Grow?

Your walls, floors, appliances, carpet, or furniture – they can all provide the food mold needs to grow. But the thing all molds need most is moisture, so you’re most likely to see mold in damp places such as bathrooms, kitchens, laundry rooms, basements, and crawl spaces.

Continued

Top Tips for Controlling Mold

It’s impossible to get rid of all mold and mold spores in your home, but because mold spores can’t grow without moisture, reducing moisture in your home is the best way to prevent or eliminate mold growth. If there is already mold growing in your home, it’s important to clean up the mold and fix the problem causing dampness. If you clean up the mold but don’t fix the problem, the mold will most likely return.

Following is some advice for reducing moisture throughout the home with specific tips for the areas most prone to dampness and mold growth:

Around the house:

  • Use dehumidifiers and air conditioners, especially in hot, humid climates, to reduce moisture in the air.
  • Keep indoor humidity below 60% if possible. You can measure relative humidity with a hygrometer, an inexpensive instrument available at many hardware stores.
  • Keep air conditioning drip pans clean. Make sure drain lines are free of obstructions and flow properly.
  • Keep the house warm in cool weather. As the temperature goes down, the air is less able to hold moisture and it condenses on cold surfaces, which can encourage mold growth.
  • Add insulation to cold surfaces, such as exterior walls, floors, and windows to reduce condensation.
  • Dry wet areas within 24 to 48 hours to prevent mold growth.
  • Fix leaks and seepage. The ground should slope away from your house. If water is entering the house from the outside, your options range from simple landscaping to extensive excavation and waterproofing.
  • Have a heating and cooling contractor check your heating and cooling system to make sure it’s sized and operating properly to remove humidity. If your system is too big or the airflow is incorrect, your air conditioner will not remove humidity like it should. Also, ask the contractor to check your duct system for air leaks, and proper size and air flow to each room.
  • Open doors between rooms to increase circulation, which carries heat to cold surfaces. Increase air circulation by using fans and by moving furniture from wall corners.
  • Use exhaust fans to move moisture outside (not into the attic) whenever you are cooking, washing dishes, or cleaning.
  • Turn off certain appliances if you notice moisture on windows and other surfaces.
  • Check for leaks around the kitchen sink, refrigerator ice makers, and other sources of water. Repair if necessary.
  • Empty and clean refrigerator drip pans if necessary.

Continued

In basements and crawl spaces:

  • Put a plastic cover over dirt in crawl spaces to prevent moisture from coming in from the ground. If there is standing water or the soil is wet, dry it out with fans before covering the floor.
  • Be sure crawl spaces are well ventilated by using fans and having vents installed in outside walls if necessary.
  • Consider painting concrete floors and using area rugs instead of wall-to-wall carpet in basements. If you plan to install carpet over a concrete floor, it may be necessary to use a vapor barrier (plastic sheeting) over the concrete and cover that with sub-flooring (insulation covered with plywood) to prevent a moisture problem.
  • Have your basement floor checked for leaks and have them repaired if necessary. Water can enter your home by leaking or by seeping through basement floors or walls.
  • Make sure gutters are working properly and that outdoor landscaping causes water to run away from — not toward — the house.
  • Do not finish basement walls with insulation and wall board unless your basement is very dry.

In the laundry room:

  • Vent your clothes dryer to the outside.
  • Make sure the vent is clear of obstructions, such as lint, and that there are no holes that leak air. If the vent duct is damaged, replace it with a metal duct. Have the duct cleaned at least once a year.
  • Avoid leaving damp clothes in the laundry basket or dryer. Wash and dry them promptly.
  • Use exhaust fans to remove moisture to the outside (not into the attic).
  • Use area rugs, which can be taken up and washed often instead of wall-to-wall carpeting.
  • Check for leaks around basins and tubs and have them repaired if necessary.
  • Open a window when showering.
  • Avoid leaving damp towels on the floor or in laundry hamper.

Sources

United States Environmental Protection Agency: «A Brief Guide to Mold, Moisture, and Your Home.»

Rhode Island Department of Heath: »Some Basic Facts About Mold and Mildew.»

U.S. Consumer Product Safety Commission: »Biological Pollutants in Your Home.»

University of Minnesota Extension: »Molds — Your Safe Home.»

www.webmd.com

Solved! What’s Up with the Musty Smell in My Basement?

Understand where that nasty odor is coming from and banish it for good with this four-part plan.

Q: Lately, I notice a musty smell whenever I go into my basement. What’s causing the odor and most how do I get rid of it?

A: That unpleasant, musty smell—some people describe it as akin to a wet dog—in is the calling card of mold and/or mildew. The spores of these ubiquitous fungi drift through the air until they find the damp, dark, and warm environment that allow them to multiply and thrive—conditions common to basements.

Although the majority of mold species found inside homes aren’t harmful to humans, some people are allergic to the spores and develop symptoms that include a stuffy or runny nose, headache, fatigue, coughing or wheezing, and itchy or runny eyes after spending time in a mildewed or moldy room. Stachybotrys chartarum, commonly called black mold, is linked to more serious symptoms, including chest tightness and difficulty breathing, a burning sensation in the nose and throat, dizziness, headache, and trouble concentrating. Luckily, however, black mold isn’t nearly as common as less toxic types.

The musty smell in your basement from unfettered mold and mildew growth also presents potential harm to your home’s structure.

These fungi feed on organic materials, which include wood, many types of fabric, paper, and even some glues. Given enough time, mold can heavily stain your walls, floors, and ceilings; decay wood studs and drywall; damage carpets; and eat away at wallpaper. Mold that’s reached this level requires the services of a professional trained in mold remediation, but you can easily deal with a simple case of funky mildew smell and mild mold staining yourself.

Advertisement

Simply banishing the odor won’t eliminate the issue, though; mold and mildew spores can start to multiply in as little as 24 hours if conditions are perfect, so to really conquer the stink, you must tackle the problem at the root by following these next four steps.

See also:  Instruction for use: Povidone - DR

Look for leaks in the basement that might lead to mold and mildew growth.

Discovering the source of humidity in your basement is the key to vanquishing mold and mildew (and may alert you to other issues as well). Two common and easily handled problems are condensation dripping off an uninsulated pipe or water leaking through a basement window.

  • Many basements have exposed pipes running along the ceiling or down the walls. If you spot water “sweating” off these pipes, insulate them with foam pipe wrap, available at home improvement center for less than $10. The lengths of rubbery foam are pre-cut so you can easily slip them right over pipes. However, if the pipe is actively leaking, not just sweating, call a plumber without delay to repair it.
  • If your basement has windows, look for water running down the glass or puddling underneath the window when it rains. If you spot water, remove leaves and other debris that could be clogging the outside window wells. Fill the wells with gravel to help reduce the chance of clogs. Replace old weather stripping and caulk, as well, to seal any small leaks around the window frames.

If you see water coming through a crack in the basement wall or seeping up from the foundation, the problem is a serious one outside the scope of the typical homeowner’s DIY abilities. Contact a contractor who specializes in basement repairs and waterproofing.

Lower the humidity level to under 60 percent with a dehumidifier.

Due to its underground position, your basement tends to stay cooler than the upper levels of your home during the warmer months. That can be a problem, though, when warmer air from upstairs circulates into the basement. As the warmer air rapidly cools in the basement’s lower temperature, water vapor condenses into a film of moisture that settles on the basement walls, as well as any furnishings or other items stored in the space. Moisture from the soil can also seep into a basement through the foundation, increasing indoor humidity further.

The preferred level of indoor humidity for most people is between 30 and 50 percent, while mold thrives with humidity of 60 percent or higher. Test your basement’s level with a hygrometer (available at Amazon), which shows the relative humidity of a room at a glance. Then, consider purchasing a dehumidifier to make things more comfortable for you, and less hospitable to mold and mildew.

Among the several types of dehumidifiers available, a compressor dehumidifier is best suited to basements. These devices reduce air humidity by sucking the room air over chilled coils, causing the moisture to condense into a storage tank. A good choice an average-size basement is the Frigidaire 70-Pint Dehumidifier with Effortless Humidity Control (available at Amazon).

Advertisement

Clean up all mold or mildew spores present.

Once you’ve gotten excess humidity under control, clean away the odor-producing mold and mildew.

  • Start by getting rid of any moldy or soggy cardboard boxes or other papers you’ve been storing in the basement. Mold thrives on paper products. Pack away salvageable holiday decorations and other items in large plastic containers with securely fitted lids.
  • Wash and dry any garments on the hottest settings safe for the fabric to remove mildew and mold spores.
  • Trash seriously stinky upholstered furniture, but try to save a lightly affected piece with spot treatment. First vacuum the piece (discarding the filter and bag when you’re done), then wipe it down thoroughly with a clean sponge dipped in a mixture of equal parts water and rubbing alcohol. Let it air dry completely outdoors in a sunny spot for several hours—UV rays of direct sunlight kill mold spores.
  • Next, tackle any spots of mold on the walls, ceiling, or floors with bleach. Mix four parts of water to one part of household bleach and take a stiff cleaning brush to the surface. Once the mold spots are gone, wipe the surfaces with clean water on a clean sponge and then let air-dry.

Neutralize the musty smell in the basement.

To remove any lingering musty smell, try the old-fashioned yet effective remedy of setting out a few small bowls of baking soda around the room; baking soda absorbs and neutralizes odor molecules well. Alternately, set out a few bowls of white vinegar, which also neutralize odor molecules. For more resistant smells, it’s hard to beat the moisture-and-odor-absorbing qualities of DampRid, which contains salt crystals. A four-pound tub, large enough for up to 1,000 square feet, should cost you less than $10 at Amazon.

www.bobvila.com

Basement Mold and Mildew Removal: A Guide

Mold and mildew removal can greatly improve the atmosphere inside a home. These organisms are highly hazardous to health if left to flourish in any part of the house. Moreover, they may contribute to the deterioration of building structures and materials. These organisms can grow anywhere in your household and your basement is one of their most probable breeding grounds.

There are several contractors that offer services on mold and mildew removal. These professionals use proven techniques and methods to ensure that infected areas are thoroughly cleaned. However, you may find that they also ask exorbitant amounts in exchange for their services. Fortunately, you may not need the help of these professionals to remove the mold and mildew that are accumulating in your basement. You can do the task yourself.

Scrub the Basement Floor and Walls

Getting rid of mold and mildew may require scrubbing the infected areas with a heavy duty brush. You may also need to purchase certain types of mold and mildew removal products. There are many commercial products out there that you can use in cleaning and disinfecting your basement walls and floors.

If you do not want to make a purchase of these products, you may make your own mold and mildew removal solution. The solution may be composed of a mixture between water and any of the following separately: baking soda, vinegar, bleach and hydrogen peroxide. Never try to combine any of these products together as this may result in the release of toxic fumes.

These products can be applied to the infected area moderately to help loosen and soften the overgrowth of mold and mildew before brushing. If you have a large basement, you may need the help of your family members to do this so you can easily finish the job.

Cleaning a large basement may take time especially when the mold and mildew have stubbornly clung to the different parts of your basement. Always remember to wear safety gear such as gloves and safety masks before proceeding with the task of removing the overgrowth of molds and fungus.

Get Rid of Moisture

Moisture is the main culprit behind the formation of molds and mildew. Getting rid of the moisture, therefore, is a crucial step to successfully eliminate the presence of mold and mildew in your basement. Look for the source of dampness in your basement and try to get rid of them.

Likewise, always keep your basement dry. Avoid dumping any wet materials on it. Perform regular cleaning and scrubbing, making sure that no amount of moisture is left to cling to the basement surfaces for a long time.

Regulate the Basement Temperature

Mold and mildew growth is often common in areas where there is higher humidity levels. Try to regulate the temperature of your basement to minimize humidity as much as possible. You may install ventilation equipment, such as a dehumidifier or an exhaust fan or ventilation fan if possible.

This equipment can help keep the temperature of your basement at a low level, discouraging the re-growth of any type of fungus in the area.

The best thing you can do to ensure effective mold and mildew removal in your basement is prevention. As much as possible, keep your basement clean and free from any form of moisture. Treat mold and mildew immediately at their early signs of growth and do not wait for them to accumulate in number. The more they have grown and spread throughout your basement, the more difficult it will be to remove them.

www.doityourself.com

How to Remove Mold and Mildew from Your Basement

About the Author:

eHow Contributor

This article was created by a professional writer and edited by experienced copy editors, both qualified members of the Demand Media Studios community. All articles go through an editorial process that includes subject matter guidelines, plagiarism review, fact-checking, and other steps in an effort to provide reliable information.

  • Pin
  • Share
  • Tweet
  • Share
  • Email

Eradicate basement mold and mildew as soon as you detect any growth, and you’ll be heading off serious health and structural problems. Left untreated, these fungi will spread and infiltrate surfaces such as wood, carpet and drywall, compromising indoor air quality as they flourish. Molds, in particular, can cause respiratory problems and other debilitating health issues. Removing these home contaminants involves both eradicating obvious patches, and cleaning up any dust that might contain dormant spores.

Things You’ll Need

P100 or N95 dust mask

Plastic drop cloth and sheeting

Plastic trash bags

Evaluation

Step 1

Locate the affected area by simply following your nose. Even when the growths are not apparent, the musty smell is a sure giveaway. An in-depth visual inspection will eventually reveal telltale black, gray or white and often fuzzy patches.

www.ehow.com

Complete Mold Killer & Remover DIY Bundle

KILL. CLEAN. PREVENT.

RMR-86® is a revolutionary new mold & mildew remover.

RMR-141 RTU Kills and Prevents mold and mildew.

Together they can be used on: wood, drywall, fiberglass, vinyl, siding

  • 1 — 32oz. Bottle of RMR-86
  • 1 — 32oz. Bottle of RMR-141 RTU
  • 2 — Trigger Sprayers

2 Bundles Max Per Order

FREE SHIPPING (up to $15 savings!)

Step 1 Kill & Clean:

Step 2 Stain Removal:

Step 3 Prevention Treatment:

*Always pre-test surfaces before using our products.

RMR-86® is the revolutionary new mold stain remover that is cutting labor time and costs in half for contractors across the country. No more sanding or scrub brushing. Just simply spray on any hard surface and watch the mold stains disappear in 15 seconds. It’s our powerful bleach-based patent pending formula for fast mold stain removal all around your Home. Works amazing on Boats too. Buy the bundle today and save even more. RMR-86® has superior penetration into porous surfaces such as Wood, Concrete, Drywall, Tile & Grout, Fiberglass, Vinyl, and More.

  • RMR-86® Coverage:60 square feet per 32 oz on average
See also:  How to deal with moles on giving tips, natural home remedies, video

RMR-141 Mold Killer is an EPA registered (3-in-1) cleaner designed to KILL, CLEAN, and PREVENT the growth of mold & mildew. It’s bleach-free, phosphate free, non-abrasive disinfectant mold killer that can be used on most washable surfaces. Step 3 is our secret weapon in the fight against mold & mildew because it aims to stop problems before they even happen.

  • RMR-141 Coverage:125 square feet per 32 oz average

Click Here to View — RMR-86 SDS

Click Here to View — RMR-141 RTU SDS

RMR‐86 Mold Stain and Mildew Stain Remover:

CAUTION: Use appropriate precautions when using RMR‐86. Always pre‐test surfaces before using our products. This is a commercial‐strength mold stain and mildew stain removing compound with a chlorine‐like aroma. Please consult the SDS and product label for specific instructions.

STORAGE: Inspect your package carefully to ensure contents were not damaged during shipment. Store RMR‐86 in a cool, ground level, dark area away from carpet, upholstery, metal, flooring, etc.; that may be damaged if leakage occurs after the fact. If the container shows any signs of leakage, transfer solution to a clean plastic container that can be sealed properly. Store out of reach of children and animals.

PERSONAL PROTECTIVE EQUIPMENT (PPE): Wearing full PPE is required when handling and applying RMR‐86. The minimum suit requirements are a hooded Tyvek or a chemical Poly Coated suit that is coated with a polyethylene film to protect against splash/spray. (Shieldtech 55 Chemical Protection and Shieldtech 35 Liquid/Particulate Protection coveralls) Other required materials include: latex gloves, and full face respirator with 3M 60923 P100 organic vapor/acid gas cartridge filter (or equivalent).

APPLICATION INSTRUCTIONS:

  • REQUIRED SAFETY PRECAUTIONS: Before starting application, make sure you’re wearing full PPE.
  • FOR ADDED SAFETY: Some areas, especially confined spaces like attics and crawl spaces, require added ventilation. We strongly recommend using a fan with lay‐flat ducting to add fresh makeup air to the workplace during application.
  • For best results, use on surfaces with a minimum temperature of 50° F (10° C)
  • Shake the RMR‐86 container well before application.
  • Best applied using the RMR Solution’s commercial grade electric power sprayer or 1.5‐gallon pump sprayer, or use a sprayer that is rated for corrosive solutions, such as a plastic, garden-style pump sprayers. Avoid using sprayers with metal parts, as they may corrode with use.
  • Spray affected area quickly, using wide sweeping motions, to cover entire area.
  • Wait for a few moments and watch while RMR‐86 eliminates the mold stains.
  • If, after a few moments, evidence of the stain still remains, a second application of RMR‐86 may be needed.
  • Once the stain has been removed to your satisfaction, we recommend using RMR-141 to treat all surfaces after RMR‐86 has been applied. It’s an excellent odor neutralizer & masking agent to remove any leftover odor from RMR‐86.

PRODUCT CHARACTERISTICS:

  • RMR‐86 is a ready‐to‐use product; dilution is NOT required.
  • RMR‐86 covers between 200‐300 square feet per gallon. This can vary based on the severity of the affected area, as well as how liberally the product is applied.
  • RMR‐86 works best when applied to dry surfaces at temperatures around room temperature. Frozen surfaces may be less receptive to the product. RMR‐86 may not be able to penetrate the particular building material affected if excess moisture content exists.
  • RMR‐86 can be corrosive if applied to the following materials: duct work, copper, metal, mechanicals, nail plates, steel, aluminum, or any materials prone to corrosion. If RMR‐86 is accidently applied to these materials, quickly wash area with soap and water and wipe down with WD‐40.
  • Do not apply RMR‐86 to fabrics.
  • Always pre‐test surfaces before using our products.
  • Always rinse off surface, when only using RMR‐86 by itself.

This product has a shelf life of 6 to 8 months.

Contact RMR Solutions, LLC at 866‐822‐8744

KILL. CLEAN. PREVENT.

RMR-86® is a revolutionary new mold & mildew remover.

RMR-141 RTU Kills and Prevents mold and mildew.

Together they can be used on: wood, drywall, fiberglass, vinyl, siding

  • 1 — 32oz. Bottle of RMR-86
  • 1 — 32oz. Bottle of RMR-141 RTU
  • 2 — Trigger Sprayers

2 Bundles Max Per Order

FREE SHIPPING (up to $15 savings!)

» data-bread-crumbs=»Bundles;Mold Killer;RMR-141 RTU;RMR-86;»>

Step 1 Kill & Clean:

Step 2 Stain Removal:

Step 3 Prevention Treatment:

*Always pre-test surfaces before using our products.

RMR-86® is the revolutionary new mold stain remover that is cutting labor time and costs in half for contractors across the country. No more sanding or scrub brushing. Just simply spray on any hard surface and watch the mold stains disappear in 15 seconds. It’s our powerful bleach-based patent pending formula for fast mold stain removal all around your Home. Works amazing on Boats too. Buy the bundle today and save even more. RMR-86® has superior penetration into porous surfaces such as Wood, Concrete, Drywall, Tile & Grout, Fiberglass, Vinyl, and More.

  • RMR-86® Coverage:60 square feet per 32 oz on average

RMR-141 Mold Killer is an EPA registered (3-in-1) cleaner designed to KILL, CLEAN, and PREVENT the growth of mold & mildew. It’s bleach-free, phosphate free, non-abrasive disinfectant mold killer that can be used on most washable surfaces. Step 3 is our secret weapon in the fight against mold & mildew because it aims to stop problems before they even happen.

  • RMR-141 Coverage:125 square feet per 32 oz average

Click Here to View — RMR-86 SDS

Click Here to View — RMR-141 RTU SDS

RMR‐86 Mold Stain and Mildew Stain Remover:

CAUTION: Use appropriate precautions when using RMR‐86. Always pre‐test surfaces before using our products. This is a commercial‐strength mold stain and mildew stain removing compound with a chlorine‐like aroma. Please consult the SDS and product label for specific instructions.

STORAGE: Inspect your package carefully to ensure contents were not damaged during shipment. Store RMR‐86 in a cool, ground level, dark area away from carpet, upholstery, metal, flooring, etc.; that may be damaged if leakage occurs after the fact. If the container shows any signs of leakage, transfer solution to a clean plastic container that can be sealed properly. Store out of reach of children and animals.

PERSONAL PROTECTIVE EQUIPMENT (PPE): Wearing full PPE is required when handling and applying RMR‐86. The minimum suit requirements are a hooded Tyvek or a chemical Poly Coated suit that is coated with a polyethylene film to protect against splash/spray. (Shieldtech 55 Chemical Protection and Shieldtech 35 Liquid/Particulate Protection coveralls) Other required materials include: latex gloves, and full face respirator with 3M 60923 P100 organic vapor/acid gas cartridge filter (or equivalent).

APPLICATION INSTRUCTIONS:

  • REQUIRED SAFETY PRECAUTIONS: Before starting application, make sure you’re wearing full PPE.
  • FOR ADDED SAFETY: Some areas, especially confined spaces like attics and crawl spaces, require added ventilation. We strongly recommend using a fan with lay‐flat ducting to add fresh makeup air to the workplace during application.
  • For best results, use on surfaces with a minimum temperature of 50° F (10° C)
  • Shake the RMR‐86 container well before application.
  • Best applied using the RMR Solution’s commercial grade electric power sprayer or 1.5‐gallon pump sprayer, or use a sprayer that is rated for corrosive solutions, such as a plastic, garden-style pump sprayers. Avoid using sprayers with metal parts, as they may corrode with use.
  • Spray affected area quickly, using wide sweeping motions, to cover entire area.
  • Wait for a few moments and watch while RMR‐86 eliminates the mold stains.
  • If, after a few moments, evidence of the stain still remains, a second application of RMR‐86 may be needed.
  • Once the stain has been removed to your satisfaction, we recommend using RMR-141 to treat all surfaces after RMR‐86 has been applied. It’s an excellent odor neutralizer & masking agent to remove any leftover odor from RMR‐86.

PRODUCT CHARACTERISTICS:

  • RMR‐86 is a ready‐to‐use product; dilution is NOT required.
  • RMR‐86 covers between 200‐300 square feet per gallon. This can vary based on the severity of the affected area, as well as how liberally the product is applied.
  • RMR‐86 works best when applied to dry surfaces at temperatures around room temperature. Frozen surfaces may be less receptive to the product. RMR‐86 may not be able to penetrate the particular building material affected if excess moisture content exists.
  • RMR‐86 can be corrosive if applied to the following materials: duct work, copper, metal, mechanicals, nail plates, steel, aluminum, or any materials prone to corrosion. If RMR‐86 is accidently applied to these materials, quickly wash area with soap and water and wipe down with WD‐40.
  • Do not apply RMR‐86 to fabrics.
  • Always pre‐test surfaces before using our products.
  • Always rinse off surface, when only using RMR‐86 by itself.

This product has a shelf life of 6 to 8 months.

Contact RMR Solutions, LLC at 866‐822‐8744

Related Items

RMR Odor-X PRO is a Powerful Extreme Odor Eliminator that gets rid of the toughest odors quickly, safely and effectively without the use of masking agents or fragrance. It destroys odors naturally by encapsulating the odor-producing source, eliminating the odor immediately. Leaves NO Scent.

RMR Odor-X PRO can be used in all areas that produce odors: home, office, automobile or boat. Use to eliminate toughest musty mold & mildew odors, pet, gasoline, cooking, fire & smoke odors, cigarette smoke, vomit, decay and body odors on sports equipment. Safe to use on most surfaces. It can be used in HVAC systems to eliminate odors caused by mold and mildew.

RMR Odor-X PRO is environmentally friendly, non-corrosive, non-flammable and biodegradable. It is USDA Class C recognized, safe, easy to use and does not stain.

FREE — Ultraviolet Flashlight ($39.00 Savings)

51 LED 395 nM Handheld Portable Black Light Urine and Odor Source Detector Flashlight

  • Perfect for locating the true source of the odor. If you can’t see it, you can’t treat it!
  • Clearly showing dried urine & stains of animals and humans on carpets/rugs/clothes and bathrooms.
  • The 51 Ultraviolet LED allow you to cover a much bigger area without losing the intensity of the UV light.
  • Made with high quality aluminum alloy, Emits 395 nanometer wavelength, much more of a durable use.
  • Battery type: 3 AA alkaline batteries ( Not Included ). » data-regular-description=»Big Odor Bundle w/ FREE UV Flashlight RMR Odor-X PRO is a Powerful Extreme Odor Eliminator that gets rid of the toughest odors quickly, safely and effectively without the use of masking agents or fragrance. It destroys. » data-images=»2076721610812 || B.O.B — Big Odor Bundle / FREE UV Flashlight — $39.00 Savings ||1522499747878 || B.O.B — Big Odor Bundle / FREE UV Flashlight — $39.00 Savings ||» data-collection-handles=»bundles,featured-products,all-starter-bundles,rmr-solutions-treatment-products» > Quick View

    See also:  Differences Between Insects and Spiders: Lesson for Kids

    The reason RMR-86® is such a boost for your job profits is that it greatly cuts down your labor time on jobs. That said, if your delivery system requires you to hand pump to apply the solution, you’ll end up wasting thousands on extra labor over a typical month. Why not get the full benefit and truly slash your labor to more than half of the normal time? The RMR-86® electric 110 Volt sprayer is specially designed to deliver the entire benefit of RMR-86® quickly and efficiently. Made to last, every part of the sprayer has been specially designed to be corrosive friendly for maximum longevity. It works great with our Mold Killer RMR-141 RTU Disinfectant. At a price far cheaper than all other similar delivery systems on the market, ino-brainerrainer. Get yours today and start multiplying your profits to the maximum!

    *Must Read* RMR-86 User Instructions Before Using. Full PPE is needed for personal safety when spraying the product. RMR-86 should be stored in a cool, ground level, dark area away from carpet, upholstery, metal, flooring, etc.; that may be damaged if leakage occurs after the fact. Please inspect all contents of packages upon delivery to ensure that they were not damaged during shipping.

    Click Here to View — RMR-86 SDS

    RMR‐86 Mold Stain and Mildew Stain Remover:

    CAUTION: Use appropriate precautions when using RMR‐86. Always pre‐test surfaces before using our products. This is a commercial‐strength mold stain and mildew stain removing compound with a chlorine‐like aroma. Please consult the SDS and product label for specific instructions.

    STORAGE: Inspect your package carefully to ensure contents were not damaged during shipment. Store RMR‐86 in a cool, ground level, dark area away from carpet, upholstery, metal, flooring, etc.; that may be damaged if leakage occurs after the fact. If the container shows any signs of leakage, transfer solution to a clean plastic container that can be sealed properly. Store out of reach of children and animals.

    PERSONAL PROTECTIVE EQUIPMENT (PPE): Wearing full PPE is required when handling and applying RMR‐86. The minimum suit requirements are a hooded Tyvek or a chemical Poly Coated suit that is coated with a polyethylene film to protect against splash/spray. (Shieldtech 55 Chemical Protection and Shieldtech 35 Liquid/Particulate Protection coveralls) Other required materials include: latex gloves, and full face respirator with 3M 60923 P100 organic vapor/acid gas cartridge filter (or equivalent).

    APPLICATION INSTRUCTIONS:

    • REQUIRED SAFETY PRECAUTIONS: Before starting application, make sure you’re wearing full PPE.
    • FOR ADDED SAFETY: Some areas, especially confined spaces like attics and crawl spaces, require added ventilation. We strongly recommend using a fan with lay‐flat ducting to add fresh makeup air to the workplace during application.
    • For best results, use on surfaces with a minimum temperature of 50° F (10° C)
    • Shake the RMR‐86 container well before application.
    • Best applied using the RMR Solution’s commercial grade electric power sprayer or 1.5‐gallon pump sprayer, or use a sprayer that is rated for corrosive solutions, such as a plastic, garden-style pump sprayers. Avoid using sprayers with metal parts, as they may corrode with use.
    • Spray affected area quickly, using wide sweeping motions, to cover entire area.
    • Wait for a few moments and watch while RMR‐86 eliminates the mold stains.
    • If, after a few moments, evidence of the stain still remains, a second application of RMR‐86 may be needed.
    • Once the stain has been removed to your satisfaction, we recommend using RMR Botanical to treat all surfaces after RMR‐86 has been applied. It’s an excellent odor neutralizer & masking agent to remove any leftover odor from RMR‐86.

    PRODUCT CHARACTERISTICS:

    • RMR‐86 is a ready‐to‐use product; dilution is NOT required.
    • RMR‐86 covers between 200‐300 square feet per gallon. This can vary based on the severity of the affected area, as well as how liberally the product is applied.
    • RMR‐86 works best when applied to dry surfaces at temperatures around room temperature. Frozen surfaces may be less receptive to the product. RMR‐86 may not be able to penetrate the particular building material affected if excess moisture content exists.
    • RMR‐86 can be corrosive if applied to the following materials: duct work, copper, metal, mechanicals, nail plates, steel, aluminum, or any materials prone to corrosion. If RMR‐86 is accidently applied to these materials, quickly wash area with soap and water and wipe down with WD‐40.
    • Do not apply RMR‐86 to fabrics.
    • Always pre‐test surfaces before using our products.
    • Always rinse off surface, when only using RMR‐86 by itself.

    This product has a shelf life of 6 to 8 months.

    Contact RMR Solutions, LLC at 866‐822‐8744

    Is RMR-86™ safe to use on painted surfaces, or will it damage them?

    RMR-86™ should not be used on painted surfaces, as it may damage the paint.

    What type of surface is RMR-86™ safe to use on without the likelihood of damaging them?

    RMR-86™ is safe to use on roofs & shingles, concrete & stucco, wood & lumber, siding & walls, toilets & basins, plastics & PVC, and other unconditioned areas.

    Can you prove your claims about the 654% profit increase from using RMR-86™ for just two days?

    Yes!! The videos speak for themselves.

    What makes your product different than other mold stain removers?

    The scientifically designed formula of RMR-86™ allows it to remove mold stains and mildew stains rapidly with zero scrubbing. This saves you time and labor costs!

    Why should I use RMR-86™ over competitor products?

    RMR-86™ is the most advanced mold stain and mildew stain remover on the market today. It has been specifically formulated and tested in the field for two years.

    Are there special deals for customers who consume very high quantities of RMR-86™?

    Yes! Please call us at 866-822-8744 to discuss your large order.

    Why is shipping so expensive?

    FedEx and other companies charge Hazmat surcharges. To alleviate costs, we recommend placing orders in large quantities only. Also, ask about our local contractors program. Check out our page for FREE SHIPPING! Due to recent changes in UPS, FED EX & USPS rating methods, the quotes shown at Checkout may be rather out of wack, particularly for small orders. The web team is looking into this problem. In the meanwhile, please know that your card does not get charged for shipping at this point. We’ll look at each order and manually capture only what’s required for your class of shipping. Your order may qualify for Free Local Pickup! If you have any questions, please call us!

    Are there any special programs to help lower or remove shipping costs?

    Yes. Please call us at 866-822-8744 to discuss our local pick up options and or if your order qualify’s for FREE shipping options.

    What type of sprayer do I need to use for RMR-86™ and why?

    We highly recommend the specially designed RMR Electric Sprayer. You’ll need an advanced delivery system to fully benefit from the RMR-86™’s labor-saving properties.

    Why must I wear PPE (personal protection equipment) when I’m applying RMR-86™?

    RMR-86™ is Sodium hypochlorite-based, which can be hazardous without proper equipment and precautions. In addition, mold stain cleanup environments are already hazardous and precautions should always be taken.

    If I don’t use RMR-86™ within 120 days of the manufacture date, what happens?

    Under proper storage RMR-86™ is scientifically designed to maintain its performance properties for 120 days. Due to its chemical makeup, it will breakdown slowly after that and lose it’s strength.

    How long does the chlorine-like odor typically last once the area is treated?

    The chlorine-like odor lasts for, on average 24 hours after application. But if RMR Botanical is used as the last step the chlorine odor will go away after a hour on average.

    Do you offer local pickup for contractors?

    Yes! We have a distribution center out of Brighton, MI and Tampa, FL.

    Do you have a user guide for RMR-86™?

    The user guide is available near the bottom of the RMR-86 product page on this website.

    Can you help me determine the best pricing for the amount of gallons I need of RMR-86™?

    Sure! Just give us a call at (866) 822-8744. We’d be happy to go over the pricing options available for the amount of gallons you’ll require.

    Do you offer a refund policy?

    Please review our refund policy by clicking the link at the bottom of our website.

    Do you have special prices for franchises?

    Please give us a call at (866) 822-8744 to discuss options for franchises.

    How long does it take for my order to be shipped?

    All RMR-86™ and RMR Botanical orders will be processed within 24 business hours. Shipping time will vary between 3-5 days, depending on the shipping location.

    Is RMR-86™ produced on a weekly basis?

    Yes, RMR-86™ is produced on a weekly, sometimes daily basis.

    Is RMR-86™ corrosive?

    Yes, RMR-86™ may be corrosive on certain materials. Please visit our User Instructions page for more information.

    What comes in the box when I order RMR-86™ or RMR Botanical?

    The products ordered and a copy of your invoice will be received in each product order.

    RMR Electrical Sprayer

    How to work the RMR Bucket Sprayer

    Bundle Options Include:

    18 Gallon Pro Start Bundle

    • 4 — 2.5 Gallons of RMR-86®
    • 8 — 1 Gallons of RMR-141 RTU
    • 1 — RMR Electric Sprayer

    9 Gallon Pro Start Bundle

    • 2 — 2.5 Gallons of RMR-86®
    • 4 — 1 Gallons of RMR-141 RTU
    • 1 — RMR Electric Sprayer

    » data-regular-description=» SDS User Instructions FAQ How To Use Video The Power Of Fast Mold Stain Remover & RMR-141 RTU With Our Best Sprayer Altogether. The RMR-86 Starter Plus Bundle Is A Great Value!! The reason RMR-86® is. » data-images=»2900950745148 || Professional Mold Kill and Mold Stain Remover Starter Bundle ||1492098547750 || Pro Starting Kit for Mold Removal | RMR86 ||1492098613286 || Pro Starting Kit for Mold Removal | RMR86 ||1492098777126 || Pro Starting Kit for Mold Removal | RMR86 ||2900928790588 || Complete Mold Kill & Prevent Starter Plus Bundle ||» data-collection-handles=»bundles,featured-products,all-starter-bundles» > Quick View

    www.u-savenow.com

  • Share:
    No comments

    Добавить комментарий

    Your e-mail will not be published. All fields are required.

    ×
    Recommend
    Adblock
    detector