Instructions for Use

Instructions for Use

Contents

The use of RemarsGel does not differ from the use of conventional toothpaste. Tooth brushing is done with washing movements from the gum to the edge of teeth (like regular toothpaste). The only difference is that it is necessary to use two tubes. Thanks to the convenient design of tubes that can be opened with a flick of the thumb, the procedure takes less than three minutes.

Main recommendations

(For the doctor’s prescription of a dental remotherapy course)

It is necessary necessary to use RemarsGel 1-2 times a day. Both therapy and treatment should be done daily. RemarsGel can be used both at home and for treatment at a dental clinic.

The course of tooth enamel restoration consists of 20-28 procedures. In case of visible tooth damage, RemarsGel should be used every day to restore tooth enamel, and then 1-2 times a week to secure the effect.

10-14 procedures are quite enough for preventive treatment. It is recommended to undergo preventive treatment with RemarsGel 3 times a year.

The only restrictions in the use of the complex are presence of traumatic lesions of the oral cavity and pronounced inflammatory processes.

remarsgel.com

Coronavirus disease (COVID-19) advice for the public: When and how to use masks

Advice on the use of masks in the context of COVID-19

This document provides advice on the use of masks in communities, during home care, and in health care settings in areas that have reported cases of COVID-19. It is intended for individuals in the community, public health and infection prevention and control (IPC) professionals, health care managers, health care workers (HCWs), and community health workers. This updated version includes a section on Advice to decision makers on the use of masks for healthy people in community settings.

Rational use of personal protective equipment for coronavirus disease (COVID-19)

This document summarizes WHO recommendations for the rational use of personal protective equipment (PPE), in health care and community settings, including the handling of cargo. This document is intended for those involved in the distribution and management of PPE, as well as public health authorities and individuals in health care and community settings to understand when PPE use is most appropriate.

www.who.int

U.S. Food and Drug Administration

Not for implementation. Contains non-binding recommendations.

This guidance provides recommendations for developing the content and format of an Instructions for Use (IFU) document for human prescription drug and biological products and drug-device or biologic-device combination products submitted under a new drug application (NDA) or a biologics license application (BLA). , The IFU is developed by applicants for patients who use drug products that have complicated or detailed patient-use instructions. The recommendations in this guidance are intended to help develop consistent content and format across IFUs and to help ensure that patients receive clear, concise information that is easily understood for the safe and effective use of such prescription products. Thus, the recommendations in this guidance are ultimately intended to enhance patients’ understanding of IFUs and facilitate the development and approval of IFUs that are clear and helpful to patients.

Submit Comments

You can submit online or written comments on any guidance at any time (see 21 CFR 10.115(g)(5))

If unable to submit comments online, please mail written comments to:

Dockets Management
Food and Drug Administration
5630 Fishers Lane, Rm 1061
Rockville, MD 20852

All written comments should be identified with this document’s docket number: FDA-2019-D-1615.

www.fda.gov

Basic tasks for creating a PowerPoint presentation

PowerPoint presentations work like slide shows. To convey a message or a story, you break it down into slides. Think of each slide as a blank canvas for the pictures and words that help you tell your story.

Choose a theme

When you open PowerPoint, you’ll see some built-in themes and templates. A theme is a slide design that contains matching colors, fonts, and special effects like shadows, reflections, and more.

On the File tab of the Ribbon, select New, and then choose a theme.

PowerPoint shows you a preview of the theme, with four color variations to choose from on the right side.

Click Create, or pick a color variation and then click Create.

Insert a new slide

On the Home tab, click the bottom half of New Slide, and pick a slide layout.

Save your presentation

On the File tab, choose Save.

Pick or browse to a folder.

In the File name box, type a name for your presentation, and then choose Save.

Note: If you frequently save files to a certain folder, you can ‘pin’ the path so that it is always available (as shown below).

See also:  Book Dream Meaning: Interpret Now!

Tip: Save your work as you go. Press Ctrl+S often.

Add text

Select a text placeholder, and begin typing.

Format your text

Select the text.

Under Drawing Tools, choose Format.

Do one of the following:

To change the color of your text, choose Text Fill, and then choose a color.

To change the outline color of your text, choose Text Outline, and then choose a color.

To apply a shadow, reflection, glow, bevel, 3-D rotation, a transform, choose Text Effects, and then choose the effect you want.

Add pictures

On the Insert tab, do one of the following:

To insert a picture that is saved on your local drive or an internal server, choose Pictures, browse for the picture, and then choose Insert.

To insert a picture from the web, choose Online Pictures, and use the search box to find a picture.

Choose a picture, and then click Insert.

Add shapes

You can add shapes to illustrate your slide.

On the Insert tab, select Shapes, and then select a shape from the menu that appears.

In the slide area, click and drag to draw the shape.

Select the Format or Shape Format tab on the ribbon. Open the Shape Styles gallery to quickly add a color and style (including shading) to the selected shape.

Add speaker notes

Slides are best when you don’t cram in too much information. You can put helpful facts and notes in the speaker notes, and refer to them as you present.

To open the notes pane, at the bottom of the window, click Notes .

Click inside the Notes pane below the slide, and begin typing your notes.

Give your presentation

On the Slide Show tab, do one of the following:

To start the presentation at the first slide, in the Start Slide Show group, click From Beginning.

If you’re not at the first slide and want to start from where you are, click From Current Slide.

If you need to present to people who are not where you are, click Present Online to set up a presentation on the web, and then choose one of the following options:

Get out of Slide Show view

To get out of Slide Show view at any time, on the keyboard, press Esc.

Choose a theme

When you start a new presentation PowerPoint, you’ll have the opportunity to choose a theme or template. A theme is a slide design that contains matching colors, fonts, and special effects like shadows, reflections, and more.

On the File tab, select New, and then, under Available Templates and Themes, choose Themes.

As you click each theme, PowerPoint shows you a preview on the right side.

When you find the one you want, click Create.

Insert a new slide

On the Home tab, click the bottom half of New Slide, and pick a slide layout.

Save your presentation

On the File tab, choose Save.

In the File name box, type a name for your presentation, and then choose Save.

Tip: Save your work as you go. Press Ctrl+S often.

Add text

Select a text placeholder, and begin typing.

Format your text

Select the text.

Under Drawing Tools, choose Format.

Do one of the following:

To change the color of your text, choose Text Fill, and then choose a color.

To change the outline color of your text, choose Text Outline, and then choose a color.

To apply a shadow, reflection, glow, bevel, 3-D rotation, a transform, choose Text Effects, and then choose the effect you want.

Add pictures

On the Insert tab, choose Picture.

Browse for the picture you want, and then choose Insert.

Add shapes

You can add shapes to illustrate your slide.

On the Insert tab, select Shapes, and then select a shape from the menu that appears.

In the slide area, click and drag to draw the shape.

Select the Drawing Tools Format tab on the ribbon. Open the Shape Styles gallery to quickly add a color and style (including shading) to the selected shape.

Add speaker notes

Slides are best when you don’t cram in too much information. You can put helpful facts and notes in the speaker notes, and refer to them as you present. In Normal view, the Notes pane is located just below the slide view window.

On the View tab, in the Presentation Views group, click Normal.

Click inside the Notes pane below the slide, and begin typing your notes.

Give your presentation

On the Slide Show tab, do one of the following:

To start the presentation at the first slide, in the Start Slide Show group, click From Beginning.

If you’re not at the first slide and want to start from where you are, click From Current Slide.

If you need to present to people who are not where you are, click Broadcast Slide Show to set up a presentation on the web. To learn more, see Broadcast your PowerPoint presentation to a remote audience.

Get out of Slide Show view

To get out of Slide Show view at any time, on the keyboard, press Esc.

Choose a theme

When you start a new presentation PowerPoint, you’ll have the opportunity to choose a theme or template. A theme is a slide design that contains matching colors, fonts, and special effects like shadows, reflections, and more.

Click the Microsoft Office Button , and then click New.

Under Templates, click Installed Themes.

As you click each theme, PowerPoint shows you a preview on the right side.

When you find the one you want, click Create at the bottom of the window.

Insert a new slide

On the Home tab, click the bottom half of New Slide, and pick a slide layout.

Save your presentation

Click the Microsoft Office Button , and then click Save.

In the File name box, type a name for your presentation, and then choose Save.

Tip: Save your work as you go. Press Ctrl+S often.

Add text

Select a text placeholder, and begin typing.

Format your text

Select the text.

Under Drawing Tools, choose Format.

Do one of the following:

To change the color of your text, choose Text Fill, and then choose a color.

To change the outline color of your text, choose Text Outline, and then choose a color.

See also:  Melon aphids on cucumbers: what is dangerous, signs of damage, prevention of occurrence, methods of control, folk remedies, chemicals - Tips

To apply a shadow, reflection, glow, bevel, 3-D rotation, a transform, choose Text Effects, and then choose the effect you want.

Add pictures

On the Insert tab, choose Picture.

Browse for the picture you want, and then choose Insert.

Add speaker notes

Slides are best when you don’t cram in too much information. You can put helpful facts and notes in the speaker notes, and refer to them as you present. In Normal view, the Notes pane is located just below the slide view window.

On the View tab, in the Presentation Views group, click Normal.

Click inside the Notes pane below the slide, and begin typing your notes.

Give your presentation

On the Slide Show tab, do one of the following:

To start the presentation at the first slide, in the Start Slide Show group, click From Beginning.

If you’re not at the first slide and want to start from where you are, click From Current Slide.

Get out of Slide Show view

To get out of Slide Show view at any time, on the keyboard, press Esc.

Tips for creating an effective presentation

Consider the following tips to keep your audience interested.

Minimize the number of slides

To maintain a clear message and to keep your audience attentive and interested, keep the number of slides in your presentation to a minimum.

Choose an audience-friendly font size

The audience must be able to read your slides from a distance. Generally speaking, a font size smaller than 30 might be too difficult for the audience to see.

Keep your slide text simple

You want your audience to listen to you present your information, instead of reading the screen. Use bullets or short sentences, and try to keep each item to one line.

Some projectors crop slides at the edges, so that long sentences might be cropped.

Use visuals to help express your message

Pictures, charts, graphs, and SmartArt graphics provide visual cues for your audience to remember. Add meaningful art to complement the text and messaging on your slides.

As with text, however, avoid including too many visual aids on your slide.

Make labels for charts and graphs understandable

Use only enough text to make label elements in a chart or graph comprehensible.

Apply subtle, consistent slide backgrounds

Choose an appealing, consistent template or theme that is not too eye-catching. You don’t want the background or design to detract from your message.

However, you also want to provide a contrast between the background color and text color. The built-in themes in PowerPoint set the contrast between a light background with dark colored text or dark background with light colored text.

For more information about how to use themes, see Apply a theme to add color and style to your presentation.

Check the spelling and grammar

To earn and maintain the respect of your audience, always check the spelling and grammar in your presentation.

support.office.com

Use mail merge for bulk email, letters, labels, and envelopes

Mail merge lets you create a batch of documents that are personalized for each recipient. For example, a form letter might be personalized to address each recipient by name. A data source, like a list, spreadsheet, or database, is associated with the document. Placeholders—called merge fields—tell Word where in the document to include information from the data source.

You work on the main document in Word, inserting merge fields for the personalized content you want to include. When the mail merge is complete, the merge document will generate a personalized version of itself for each name in the data source.

Data sources

Your first step in setting up a mail merge is to pick the source of data you’ll use for the personalized information. Excel spreadsheets and Outlook contact lists are the most common data sources, but any database that you can connect to Word will work. If you don’t yet have a data source, you can even type it up in Word, as part of the mail merge process.

Excel or Outlook

If you know you’ll be using Excel or Outlook as the source of your data, see:

Document types

Word provides tools for incorporating your data into the following kinds of documents. Follow the links for details about each type:

Letters that include a personalized greeting. Each letter prints on a separate sheet of paper.
Create and print a batch of personalized letters

Email where each recipient’s address is the only address on the To line. You’ll be sending the email directly from Word.

Envelopes or Labels where names and addresses come from your data source.

Directory that lists a batch of information for each item in your data source. Use it to print out your contact list, or to list groups of information, like all of the students in each class. This type of document is also called a catalog merge.

Data sources

Your first step in setting up a mail merge is to pick the source of data you’ll use for the personalized information. Excel spreadsheets and Outlook contact lists are the most common data sources, but if you don’t yet have a data source, you can type it up in Word, as part of the mail merge process.

Excel spreadsheet works well as a data source if all data is on one sheet and the data is formatted so that it can be read by Word. For more info, see Prepare your data source in Excel for a mail merge in Word for Mac.

Outlook Contact List contains data in a format that can be read by Word. See Use Outlook contacts as a data source for a mail merge

Word data file is a data source you can create on the fly, within Word. For more info, see Set up a mail merge list with Word.

Document types

Letters that include a personalized greeting. Each letter prints on a separate sheet of paper.
Create and print a batch of personalized letters

Email where each recipient’s address is the only address on the To line. You’ll be sending the email directly from Word.

Envelopes or Labels where names and addresses come from your data source.

See also:  How Do Bug Sprays (Like Raid and Baygon) Kill Cockroaches? » Science ABC

Data sources

Your first step in setting up a mail merge is to pick the source of data you’ll use for the personalized information. Excel spreadsheets and Outlook contact lists are the most common data sources, but if you don’t yet have a data source, you can type it up in Word, as part of the mail merge process.

Excel spreadsheet works well as a data source if all data is on one sheet and the data is formatted so that it can be read by Word. For more info, see Prepare your data source in Excel for a mail merge in Word.

Outlook Contact List contains data in a format that can be read by Word. See Use Outlook contacts as a data source for a mail merge

Word data file is a data source you can create on the fly, within Word. For more info, see Set up a mail merge list with Word.

Document types

Word provides tools for incorporating your data into the following kinds of documents. Follow the links for details about each type:

Letters that include a personalized greeting. Each letter prints on a separate sheet of paper.

Envelopes or Labels where names and addresses come from your data source.

If you open a mail merge document that you created with the Word desktop application, Word Web App will preserve all of the mail merge settings in it, but you can’t perform a mail merge or edit any mail merge settings.

If you have the Word desktop application, open the document there and perform a mail merge there.

support.office.com

How to use AirPods with an Android phone: Samsung Galaxy, Pixel, Huawei and more

Apple’s AirPods are some of the best wireless earbuds you can buy, and they even work with Android phones. Here’s how.

Use your AirPods with your Android phone and don’t feel guilty about it.

Android owners, don’t be jealous. With a little effort, you can use Apple’s AirPods without switching to iPhone . For many, AirPods and AirPods Pro are the holy grail of headphones. These small, wireless earbuds sound good, have stellar battery life and solid noise cancelation.

You’ll need to take a few extra steps to pair AirPods with your Android phone compared to pairing them with an iPhone, but playback controls still work well, and you can even install an app to view your AirPod’s battery life , just like you can on the iPhone and iPad .

While the experience won’t be quite as complete as it would be for an iPhone user (you’ll lack that tight integration with the iPhone’s H1 chip), it’s worth the setup time, and you won’t miss out on the AirPod’s best features.

Pairing your AirPods is just like any other Bluetooth device.

Screenshots by Jason Cipriani/CNET

Pair AirPods with your Android phone

When pairing AirPods with an Android phone, you won’t get the fancy iPhone method of opening the AirPods case and waiting for a prompt to appear and pair the devices. Instead, you’ll have to use the tried-and-true method of diving into your device’s Bluetooth settings.

1. Swipe down from the top of your screen to open the quick settings panel, then long-press on the Bluetooth icon.

2. Depending on your phone, you may have to select Add new device or Pair new device.

3. With the AirPods in the charging case, open the lid.

4. On the back of the case is a small button. Press and hold it until the indicator light starts blinking white.

5. Your AirPods will then show up in the pairing menu on your Android phone Select them and follow any prompts on your phone.

With the AirPods connected to your Android phone, you can use them just as you would any other Bluetooth headphones or earbuds. They’ll auto-connect when taken out of the case, and disconnect when you put them back in the case.

If your Android phone supports reverse wireless charging, you can charge them up on the back of your phone. They’ll also charge wirelessly through any other Qi-supported pad, or through Apple’s Lightning cable.

There are several third-party apps that add functionality to your AirPods.

You’re going to miss out on a few features

Naturally, if you aren’t using the AirPods with an iPhone or another Apple product, you won’t be able to access every feature.

For example, I can still control my AirPods Pro’s playback on an Android phone by squeezing the stem of either earbud. I can even turn noise cancellation on and off with a long squeeze on either stem. Controlling playback on standard AirPods (e.g., not Pro) is also possible with just a tap on either earbud.

There are even third-party applications that let you view battery levels just by opening the case next to your phone. I use an app called AirBattery and haven’t had any issues with it. Plus, it’s free.

You won’t get all of the AirPods features when paired with Android, but you do get most of them.

One feature you’ll miss out on is auto-pause and resume when you take an AirPod out and put it back in your ear. It’s easily one of my favorite features of AirPods, and one I sorely miss when using them on Android. The third-party app AirBattery claims to support auto-pausing as a beta feature, but only when you’re playing music from Spotify, which I don’t subscribe to. The app also warns you enabling the beta feature will drain your Android phone’s battery faster.

Additionally, you won’t be able to trigger Google Assistant with the AirPods, like iPhone users can do with Siri — simply because Apple programmed its earbuds to work with its own voice assistant, not its competitor’s. You’ll need to start those queries the traditional way, by talking to your phone.

The AirPods Pro are my favorite wireless earbuds, by a long shot. But there are also plenty of worthy competitors starting to become available. We have a roundup of AirPods Pro alternatives that cost less , along with some of the best wireless earbuds that are under $100 . We also have a running list of the best wireless earbuds you can buy today .

www.cnet.com

Share:
No comments

Добавить комментарий

Your e-mail will not be published. All fields are required.