Instructions for use of insecticide

Instructions for use of insecticide

The fight against insect pests is that under the power of the drug, which is called the Akropercote. The Akro insecticide, an instruction that states that the drug, due to a special mechanism, affects the nervous system of pests. The product has proven itself in practice. It perfectly combines high activity against insects, as well as complete safety for the human body and animals.

Principles of drug exposure

Insecticide Akro’s opercrete has only two main components in its composition. These ingredients have completely different effects. This combination makes it possible to have a harmful effect on the intestinal receptors of parasites. The mechanism of action of the remedy is as follows: a poisonous product enters the body of parasites and, with repeated consumption, paralyzes the work of the intestinal tract. The insect as a result of this can not eat and dies. In the case of direct ingestion of the substance, paralysis of the insect’s nervous system occurs and, as a result, instantaneous death.

Insecticide provides plant protection for a period of 14 days to 3 weeks.

Application

The drug that we offer you can be actively used for sowing winter crops, alfalfa, rapeseed, and legumes. Nevertheless, there is evidence that the Acro’s insecticide, Acrcot, has proven itself in the protection of vegetable crops. Gardeners also use a means to protect orchards. The product is very effective in combating sucking, as well as leaf-eating parasites. It is in fact a universal means of protecting your plants. The product is used in many agrarian branches. The drug has proved itself from the positive side, so you can apply the acrococcus Acroc insecticide in agriculture for instructions for good purposes.

Product Benefits

To insecticide Ocercot was appreciated by you, read the main advantages of this drug. Here are the main features:

  • the threshold of damaging effect is minimal;
  • system-contact universal application;
  • the drug is harmless to your plants, but deadly to the pest;
  • the product does not give a single chance to pests, as adaptation to existing components is impossible;
  • long-term protection;
  • the drug has a high striking effect, the use of the insecticide of the ocercate, even in a small amount, will exceed your expectations;
  • the product can be mixed with other substances.

If you decide to purchase an insecticide, which is called Acropercote, go to specialized stores.

How to apply an insecticide?

The drug belongs to the middle class of danger to humans and to the higher class in relation to insects (high level of toxicity). Because the product is dangerous to insects, therefore, it is toxic not only to pests, but also to useful individuals. Do not treat plants that are located near the apiary. At least, you need to try to limit the flight zone of bees. It should be five kilometers. Summer time should be limited (3 days after treatment).

The product is sold in powder form, which should be moistened. Prepare a toxic mixture on the day of processing your plants.

In the Acroc insecticide, the instruction says that the required amount of the substance should be mixed with the correct amount of water. Processing is carried out after complete dissolution of the product. Work is carried out during the growing season.

The product has the same effect on all pests. It can be used in summer and in spring. Shelf life of the product is three years, subject to storage conditions. The drug is resistant to low and high temperatures.

licklogplayers.org

Regent 4SC Insecticide

Regular price $1,200.00

Status : Out of Stock

RUP Notice :
The product is a Restricted Use Pesticide (RUP). You must have a valid dealer or applicator license to purchase this item. Once you order, send us a copy of your license. We will not ship your order until we receive a copy of your license.
Email: [email protected]
Fax: 636-532-4497

Regent insecticide is a premium seed treatment that offers superior seed safety and excellent protection from the most troublesome pests. At the heart of Regent is the active ingredient fipronil.

Active Ingredient : Fipronil 39.4%

Comparable Product : Fipronil®

Manufacturer : BASF

Usage Rate Recommendations :
2.9 — 3.2 Fl. Oz. per acre

For specific details on control of these target pest and use rates check the label provided

See also:  Vaccinating Dogs Against Lyme Disease: Two Points of View

Billbugs
Chinch Bugs
Common Stalk Borer
European Corn Borer
Grubs
Rootworm Larvae
Seedcorn Beetles
Seedcorn Maggots
Thrips
Wire Worms

For specific details on these areas of use and use rates check the label provided

This product is not registered for use in the following states:

This is a Restricted Use Product. You must submit your RUP applicator or dealer license. We will not ship this product until we receive a copy of your license. Email to [email protected] or fax to 636-532-4497

CA Residents
At this time ChemicalWarehouse does not ship EPA registered chemicals/pesticides to California. If your shipping address is in CA we will cancel your order. Send us a message if you have any questions regarding CA shipping. We will work to change this policy in the near future.

International:
At this time ChemicalWarehouse does not ship pesticides outside of the Continental United States. (No shipping to Alaska, Hawaii, Puerto Rico, Canada, Mexico, US Military Bases, or US Territories)

chemicalwarehouse.com

Instructions for use of the insecticide Regent

Let’s explore the limits of what’s possible on every acre.

Every growing season is filled with decisions, plans, agronomic insights, guesses, second-guesses, challenges, and some very well-earned successes. Yours is simply one of the hardest — and most important — jobs on earth. And you wouldn’t trade it for anything.

At BASF, we know you do this work because you love it, despite all the challenges you face — unpredictable weather, weeds and diseases, market prices, yield pressures, financial pressures, and so much more.

We share your passion for farming. That’s why we partner with you every day to push past the status quo and get you the most, acre after acre, season after season.

You may never leave this land, but on it, there are places you can go, goals you can reach, yields you can top. Our job is to help you reach them by applying the right agronomic thinking, customized planning and product innovations, all through a team of dedicated, highly experienced people at your side.

Whatever growing season this is for you, let’s work together and see what’s possible in your operation, now and for seasons to come.

Take advantage of a host of resources and information from your partner in the field.

agproducts.basf.us

Avatar

GROUP 22A INSECTICIDE

Commercial use

Domestic use

General Instructions

Avatar insecticide has been specifically designed for use in Integrated Pest Management (IPM) schemes. Avatar is an oxadiazine insecticide in the form of a water dispersible granule. Avatar is particularly active on Lepidopteran insect pests, primarily as a larvicide. Before application monitor insect populations to determine whether or not there is a need for application of Avatar based on locally determined economic thresholds. More than one treatment of Avatar may be required to control a population of pests.

Insect Resistance Warning

For insecticide resistance management Avatar is a Group 22A insecticide. Some naturally occurring insect biotypes resistant to Avatar and other Group 22A insecticides may exist through normal genetic variability in any insect population. The resistant individuals can eventually dominate the insect population if Avatar or other Group 22A insecticides are used repeatedly. The effectiveness of Avatar on resistant individuals could be significantly reduced. Since the occurrence of resistant individuals is difficult to detect prior to use DuPont accepts no liability for any losses that may result from the failure of Avatar to control resistant insects. Avatar may be subject to specific resistance management strategies. To help prevent the development of resistance to Avatar®insecticide, use Avatar in accordance with the current Insecticide Resistance Management (IRM) strategy for your region. For further information contact your local supplier, FMC representative or local department agronomist.

Product Use

Mixing

Always add dry Avatar to water in tank. DO NOT premix or slurry. With the exception of products in water soluble bags, Avatar must be in suspension in the tank before adding companion products or surfactant.

Fill spray tank to ¼ to ½ full of water. Measure the amount of Avatar insecticide required for the area to be sprayed. Add Avatar insecticide directly to the spray tank with the agitation engaged. Mix thoroughly to disperse the insecticide. Once dispersed, the material must be kept in suspension at all times by continuous agitation. Use mechanical or hydraulic means, DO NOT use air agitation, premix or slurry.

If spray solution is left standing, ensure thorough reagitation of the spray mix until fully resuspended. DO NOT allow spray mix to sit overnight, as resuspension may be difficult.

Surfactant/Wetting agent

Apricots, Apples, Capsicum, Eggplant, Grapes, Leafy vegetables, Nashi pears, Nectarines, Peaches, Pears, Peppers, Plum, Tomatoes: use a non-ionic surfactant/wetting agent at 15 g active/100 L, (e.g. Agral 600 @ 25 mL/100 L or Citowett @15 mL/100 L).

Broccoli, Brussels sprouts, Cabbage, Cauliflower: use a non-ionic surfactant/wetting agent at 75 g active/100 L, (e.g. Agral 600 @ 125 mL/100 L or Citowett @ 75 mL/100 L).

DO NOT add a non-ionic surfactant/wetting agent if:

mixing with another product which already contains a surfactant and/or the product label advises not to add a surfactant.

mixing with a liquid fertiliser

DO NOT use BS1000 or Activator-90 as it may cause crop phytotoxicity.

Application

Minimising Spray Drift

The interaction of many equipment and weather-related factors determines the potential for spray drift. The applicator must consider all these factors when making application decisions.

The most effective way to reduce drift potential is to apply large droplets (volume mean diameter (VMD) > 150 — 200 microns). The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. APPLYING LARGER DROPLETS REDUCES DRIFT POTENTIAL, BUT WILL NOT MINIMISE DRIFT IF APPLICATIONS ARE MADE IMPROPERLY OR UNDER UNFAVOURABLE ENVIRONMENTAL CONDITIONS. When making applications in hot and dry conditions, set up equipment to produce larger droplets to reduce effects of evaporation.

Dilute spraying

Use a sprayer designed to apply high volumes of water up to the point of run-off and matched to the crop being sprayed.

Set up and operate the sprayer to achieve even coverage throughout the crop canopy. Apply sufficient water to cover the crop to the point of run-off. Avoid excessive run-off.

The required volume may be determined by applying different test volumes, using different settings on the sprayer, from industry guidelines or expert advice.

Add the amount of product specified in the Directions for Use table for each 100 L of water. Spray to the point of run-off.

The required dilute spray volume will change and the sprayer set up and operation may also need to be changed, as the crop grows.

Concentrate spraying

Use a sprayer designed and set up for concentrate spraying (that is a sprayer which applies water volumes less than those required to reach the point of run off) and matched to the crop being sprayed.

Set up and operate the sprayer to achieve even coverage throughout the crop canopy using your chosen water volume.

Determine an appropriate dilute spray volume (See Dilute Spraying above) for the crop canopy. This is needed to calculate the concentrate mixing rate.

The mixing rate for concentrate spraying can then be calculated in the following way:

Dilute spray as determined above: For example 1,500 L /ha

Your chosen concentrate spray volume: For example 500 L/ha

The concentration factor in this example is 3X (i.e 1,500 L ÷ 500 L = 3)

If the dilute label rate is 25 g/100 L, then the concentrate rate becomes 3 x 25 , that is 75 g/100 L of concentrate spray.

The chosen spray volume, amount of product per 100 L of water, and the sprayer set up and operation may need to be changed as the crop grows.

For further information on concentrate spraying, users are advised to consult relevant industry guidelines, undertake appropriate competency training and follow industry Best Practices.

Ground application

Use a boom sprayer fitted with high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. Use the lower spray pressures recommended for the nozzle. Higher pressure reduces droplet size, DOES NOT improve canopy penetration and may increase drift potential. WHEN HIGHER FLOW RATES ARE NEEDED, USE A HIGHER-CAPACITY NOZZLE INSTEAD OF INCREASING PRESSURE. Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. When applying Avatar by ground application, keep the boom low to avoid spray drift. For orchard/vineyard sprayers avoid directing spray above trees and always turn-off outward pointing nozzles at row ends and outer rows.

Compatibility

Since formulations may be changed and new ones introduced, it is recommended that users premix a small quantity of the desired tank mix and observe possible adverse changes (settling out, flocculation etc). Avoid complex tank mixtures of several products or very concentrated spray mixtures. Avatar insecticide is compatible with Captan, Dextrolac, Delan, Fulasin, mancozeb, Omite, Polyram and Systhane.

The mixing sequence recommended is: water soluble bags, dry flowable or water dispersible granules (Avatar), wettable powders, water based suspension concentrates, water soluble concentrates, oil based suspension concentrates, emulsifiable concentrates, adjuvants and surfactants, soluble fertilisers.

Restraints

DO NOT apply if rainfall is expected within 2 hours of application.

DO NOT use on container, hydroponic, greenhouse or glasshouse grown crops.

DO NOT apply within 20 m upwind of water bodies.

DO NOT apply by aircraft (tomatoes excepted).

DO NOT apply less than 300 m (aerial application) or 80 m (ground application) upwind of land potentially producing feed for livestock. If the wind direction is at an angle with regard to the field then the in-field buffer must be observed on both upwind sides of the feed producing land.

DO NOT apply if rainfall is expected within 2 hours of application.

DO NOT use on container, hydroponic, greenhouse or glasshouse grown crops.

DO NOT apply within 20 m upwind of water bodies.

DO NOT apply by aircraft (tomatoes excepted).

DO NOT apply less than 300 m (aerial application) or 80 m (ground application) upwind of land potentially producing feed for livestock. If the wind direction is at an angle with regard to the field then the in-field buffer must be observed on both upwind sides of the feed producing land.

CAPSICUM, EGGPLANT, LEAFY VEGETABLES, PEPPERS, TOMATOES (FIELD AND TRELLIS): DO NOT APPLY LATER THAN 3 DAYS BEFORE HARVEST.

BROCCOLI, BRUSSELS SPROUTS, CABBAGE, CAULIFLOWER: DO NOT APPLY LATER THAN 7 DAYS BEFORE HARVEST.

APRICOT, NECTARINE, PEACH, PLUM: DO NOT APPLY LATER THAN 7 DAYS BEFORE HARVEST.

APPLES, NASHI PEARS, PEARS: DO NOT APPLY LATER THAN 14 DAYS BEFORE HARVEST.

GRAPES: DO NOT APPLY LATER THAN 8 WEEKS BEFORE HARVEST. DO NOT HARVEST TREATED GRAPE LEAVES FOR HUMAN CONSUMPTION.

GRAZING – ALL TREATED CROPS

DO NOT ALLOW LIVESTOCK TO GRAZE CROPS OR VEGETABLE WASTE (EXCEPT TOMATO POMACE) THAT HAS BEEN TREATED WITH AVATAR INSECTICIDE.

Spray Equipment Cleanout

Prior to application, start with clean, well maintained application equipment. Immediately following application, thoroughly clean all spray equipment to reduce risk of forming hardened deposits that might become difficult to remove. Drain spray equipment. Thoroughly rinse sprayer and flush hoses, boom, and nozzles with clean water. Loosen and physically remove all visible deposits. Clean all other associated application equipment.

Protection of Livestock

Dangerous to bees. DO NOT apply when bees are actively foraging. Avoid direct application or drift of the spray mix onto bee hive. After the spray has dried, bees can safely forage flowering crops. AVOID SPRAY DRIFT ONTO ADJOINING PROPERTIES OR STOCK AREAS.

Assess the treatment area before application to identify animal exposure risks. Avoid aerial application if possible.

Observe the buffer zones for aerial and ground application. If unexpected conditions cause spray drift to contaminate land that livestock could potentially graze seek advice from FMC.

Protection of wildlife, fish, crustaceans and environment

DO NOT contaminate streams, rivers or waterways with the chemical or used containers.

Protection of Crops, Native and other Non-Target Plants

DO NOT apply under weather conditions, or from spraying equipment, that may cause spray to drift onto near-by non-target plants/crops, cropping lands or pastures.

Storage and Disposal

Store in the closed, original container in a cool, dry, well-ventilated area out of direct sunlight. Store in a locked room or place away from children, animals, food, feedstuffs, seed and fertilisers.

Triple or preferably pressure rinse containers before disposal. Add rinsings to spray tank. DO NOT dispose of undiluted chemicals on site. Puncture and bury empty containers in a local authority landfill. If no landfill is available, bury the containers below 500 mm in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt.

Precautions – Re-Entry Period

DO NOT allow entry into treated areas until spray has dried. When prior entry is necessary, wear cotton overalls buttoned to the neck and wrists, a washable hat and chemical resistant gloves. Clothing must be laundered after each day’s use.

Safety Directions

Harmful if swallowed. Will irritate the eyes and skin. Avoid contact with eyes and skin. If product in eyes, wash it out immediately with water. Wash hands after use. When opening the container and preparing spray, wear cotton overalls buttoned to the neck and wrists, a washable hat, elbow-length PVC gloves and a face shield or goggles. When using the prepared spray, wear cotton overalls buttoned to the neck and wrists, a washable hat and elbow-length PVC gloves. After each day’s use wash gloves, face shield or goggles and contaminated clothing.

First Aid

If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 13 11 26.

DISCLAIMER: This is not the AVATAR label. To view or print the label for this product, click the «MSDS/Label» tab at the top of this page. Always follow label instructions.

For specialist advice in an EMERGENCY only phone 1800 033 111, TOLL-FREE, ALL-HOURS, NATIONWIDE

Product:

APVMA approval: 52546/1007

Active Constituent(s): 300 g/kg Indoxacarb
Registered For:
Overview: For the control of Lepidopteran species of insect pests in certain vegetable and fruit crops.
Documents:
To the top
Alphabetical index Ι Sitemap Ι Disclaimer Ι Sales terms and conditions Ι Useful links

FMC Australia

12 Julius Avenue
North Ryde
NSW 2113 Australia

www.fmccrop.com.au

Share:
No comments

Добавить комментарий

Your e-mail will not be published. All fields are required.

Adblock
detector