How to scan documents on your iPhone, iPad, or iPod touch using the Notes app — Apple Support

How to scan documents on your iPhone, iPad, or iPod touch using the Notes app

With Notes, you can scan documents and add a signature or manually sign a document on your iPhone, iPad, or iPod touch.

Scan a document

  1. Open a note or create a new note.
  2. Tap , then tap Scan Documents.
  3. Place your document in view of the camera on your device.
  4. If your device is in Auto mode, your document will be automatically scanned. If you need to manually capture a scan, tap or one of the Volume buttons.
  5. Drag the corners to adjust the scan to fit the page, then tap Keep Scan.
  6. You can add additional scans to the document or tap Save when you’re done.

Learn how to use the Continuity Camera to scan notes from your iPhone or iPad to your Mac.

support.apple.com

PANKO codling moth trap

instructions for use

ADHESIVE TRAP for a codling moth (Cydia pomonella L) – 2 pcs.

Intended use:
The trap is designed to monitor the presence of adult codling moths and their seasonal flight patterns from May to September.
The dispenser has been pre-baited with a pheromone produced by female codling moths to attract males into the trap, where they become immobilized on a sheet of adhesive.

Instructions for use:
1. Remove the trap from the package.
2. Remove the pheromone dispenser from the package and place it in adhesive surface
3. Hang the trap in a tree.

IMPORTANT! For best monitoring results, at least 3 traps should be distributed uniformly throughout an orchard with the area of 1–5 hectares. Check the traps every 2–3 days. The risk threshold is an average of two insects per trap.

The kit comprises two traps and two pheromone dispensers.
Do not replace traps during the season unless the adhesive surface has been significantly contaminated with dust, insects or leaves, which could reduce the trap’s effectiveness or even render it completely useless.

ADHESIVE TRAP for a plum fruit moth (Grapholita funebrana) – 2 pcs.

Intended use:
The trap is designed to monitor the presence of adult plum fruit moths and their seasonal flight patterns, i.e. from May to September. The dispenser has been pre-baited with a pheromone produced by female plum fruit moths to attract males into the trap, where they become immobilized on a sheet of adhesive.

Instructions for use:
1. Remove the trap from the package.
2. Remove the pheromone dispenser from the package and place it in the adhesive surface.
3. Hang the trap in a tree.

IMPORTANT! For best monitoring results, at least 3 traps should be distributed uniformly throughout an orchard with the area of 1–5 hectares. Check the traps every 2–3 days. The risk threshold is an average of two insects per trap.

The kit comprises two traps and two pheromone dispensers.
Do not replace traps during the season unless the adhesive surface has been significantly contaminated with dust, insects or leaves, which could reduce the trap’s effectiveness or even render it completely useless.

codlingmothtrap.com

Tutorials

Beginner¶

GIMP Quickies
Use GIMP for simple graphics needs without having to learn advanced image manipulation methods.

Simple Floating Logo
This tutorial walks through some basic image and layer manipulation techniques.

Making a Circle-Shaped Image
How to create a circular-shaped image.

Layer Masks
An introduction to using layer masks to modify the opacity of a layer.

Basic Color Curves
A first look at the Curves tool and adjusting color tones in an image.

Your GIMP Profile (and You)
What the GIMP Profile is and how to use it.

Image Formats Overview
Selecting the best image format for your purposes.

Asset Folders
Extending GIMP with new plug-ins, scripts, brushes, and more.

Photo Editing¶

Digital B&W Conversion
Detailed conversion tutorial for generating a B&W result from a color image.

Luminosity Masks
Using multiple layer masks to isolate specific tones in your image for editing.

Tone Mapping with ‘Colors/Exposure’
Using high bit depth GIMP ’s ‘Colors/Exposure’ operation to add exposure compensation to shadows and midtones while retaining highlight details.

Focus Group
Layer masking and creative filter applications.

Painting¶

Parametric Brushes
A look at the advantages and flexibility of using Parametric Brushes.

Programming¶

Basic GIMP Perl
Learn how to write simple perl scripts using the gimp-perl module ( GNU /Linux users only).

Automate Editing
Using GIMP Python to automate a workflow.

Automatic Creation of XCF from JPG
Import XCF images a directory at a time.

The list of legacy tutorials can be found found here:

Bear in mind that this list is being provided for legacy reasons only.

www.gimp.org

Create forms that users complete or print in Word

To create a form in Word that others can fill out, start with a template or document and add content controls. Content controls include things like check boxes, text boxes, date pickers, and drop-down lists. If you’re familiar with databases, these content controls can even be linked to data.

Show the Developer tab

If the developer tab isn’t displayed in the ribbon, see Show the Developer tab.

Open a template or a blank document on which to base the form

To save time, start with a form template or start from scratch with a blank template.

Go to File > New.

In Search online templates, type Forms or the type of form you want and press ENTER.

Choose a form template, and then select Create or Download.

Go to File > New.

Select Blank document.

Add content to the form

Go to Developer, and then choose the controls that you want to add to the document or form. To remove a content control, select the control and press Delete. You can set properties on controls once inserted.

Note: You can print a form that was created using content controls, but the boxes around the content controls will not print.

In a rich text content control, users can format text as bold or italic, and they can type multiple paragraphs. If you want to limit what users add, insert the plain text content control.

Click or tap where you want to insert the control.

Select Developer > Rich Text Content Control or Plain Text Content Control .

To set specific properties on the control, see Set or change properties for content controls.

A picture control is often used for templates, but you can also add a picture control to a form.

Click or tap where you want to insert the control.

Select Developer > Picture Content Control .

To set specific properties on the control, see Set or change properties for content controls.

Use building block controls when you want people to choose a specific block of text. For example, building block controls are helpful when you need to add different boilerplate text depending on the contract’s specific requirements. You can create rich text content controls for each version of the boilerplate text, and then you can use a building block control as the container for the rich text content controls.

Click or tap where you want to insert the control.

Go to Developer Building Block Gallery Content Control (or Building Block Content Control).

Select Developer and content controls for the building block.

Click or tap where you want to insert the control.

To set specific properties on the control, see Set or change properties for content controls.

In a combo box, users can select from a list of choices that you provide or they can type in their own information. In a drop-down list, users can only select from the list of choices.

Go to Developer > Combo Box Content Control or Drop-Down List Content Control .

Select the content control, and then select Properties.

To create a list of choices, select Add under Drop-Down List Properties.

Type a choice in Display Name, such as Yes, No, or Maybe.

Repeat this step until all of the choices are in the drop-down list.

Fill in any other properties that you want.

Note: If you select the Contents cannot be edited check box, users won’t be able to click a choice.

Click or tap where you want to insert the date picker control.

Select Developer > Date Picker Content Control .

To set specific properties on the control, see Set or change properties for content controls.

Click or tap where you want to insert the check box control.

Select Developer > Check Box Content Control .

To set specific properties on the control, see Set or change properties for content controls.

Legacy form controls are for compatibility with older versions of Word and consist of legacy form and Active X controls.

Click or tap where you want to insert a legacy control.

Go to Developer > Legacy Forms drop-down.

Select the Legacy Form control or Active X Control that you want to include.

Set or change properties for content controls

Each content control has properties that you can set or change. For example, the Date Picker control offers options for the format you want to use to display the date.

Select the content control that you want to change.

Go to Developer > Properties.

Change the properties that you want.

Add protection to a form

If you want to limit how much others can edit or format a form, use the Restrict Editing command:

Open the form that you want to lock or protect.

Select Developer > Restrict Editing.

After selecting restrictions, select Yes, Start Enforcing Protection.



If you want to protect only parts of the document, separate the document into sections and only protect the sections you want.

To do this, choose Select Sections in the Restrict Editing panel. For more info on sections, see Insert a section break.

Show the Developer tab

If the developer tab isn’t displayed in the ribbon, see Show the Developer tab.

Open a template or use a blank document

To create a form in Word that others can fill out, start with a template or document and add content controls. Content controls include things like check boxes, text boxes, and drop-down lists. If you’re familiar with databases, these content controls can even be linked to data.

Go to File > New from Template.

In Search, type form.

Double-click the template you want to use.

Select File > Save As, and pick a location to save the form.

In Save As, type a file name and then select Save.

Go to File > New Document.

Go to File > Save As.

In Save As, type a file name and then select Save.

Add content to the form

Go to Developer, and then choose the controls that you want to add to the document or form. To remove a content control, select the control and press Delete. You can set Options on controls once inserted. From Options, you can add entry and exit macros to run when users interact with the controls, as well as list items for combo boxes, .

In the document, click or tap where you want to add a content control.

On Developer, select Text Box, Check Box, or Combo Box.

To set specific properties for the control, select Options, and set .

Repeat steps 1 through 3 for each control that you want to add.

Options let you set common settings, as well as control specific settings. Select a control and then select Options to set up or make changes.

Set common properties.

Select Macro to Run on lets you choose a recorded or custom macro to run on Entry or Exit from the field.

Bookmark Set a unique name or bookmark for each control.

Calculate on exit This forces Word to run or refresh any calculations, such as total price when the user exits the field.

Add Help Text Give hints or instructions for each field.

OK Saves settings and exits the panel.

Cancel Forgets changes and exits the panel.

Set specific properties for a Text box

Type Select form Regular text, Number, Date, Current Date, Current Time, or Calculation.

Default text sets optional instructional text that’s displayed in the text box before the user types in the field. Set Text box enabled to allow the user to enter text into the field.

Maximum length sets the length of text that a user can enter. The default is Unlimited.

Text format can set whether text automatically formats to Uppercase, Lowercase, First capital, or Title case.

Text box enabled Lets the user enter text into a field. If there is default text, user text replaces it.

Set specific properties for a Check box.

Default Value Choose between Not checked or checked as default.

Checkbox size Set a size Exactly or Auto to change size as needed.

Check box enabled Lets the user check or clear the text box.

Set specific properties for a Combo box

Drop-down item Type in strings for the list box items. Press + or Enter to add an item to the list.

Items in drop-down list Shows your current list. Select an item and use the up or down arrows to change the order, Press — to remove a selected item.

Drop-down enabled Lets the user open the combo box and make selections.

Go to Developer > Protect Form.

Note: To unprotect the form and continue editing, select Protect Form again.

Save and close the form.

If you want, you can test the form before you distribute it.

Protect the form.

Reopen the form, fill it out as the user would, and then save a copy.

Show the Developer tab

On the right side of the ribbon, select , and then select Ribbon Preferences.

Under Customize, select Developer .

Open a template or a document on which to base the form

You can start with a blank document and create your own form. Or, to save time, you can start with a form template.

Go to File > New from Template.

In the left pane, expand Online Templates, and then select Forms.

Double-click the form template that you want to use.

Add content controls to the form

In the document, click where you want to add the control.

On the Developer tab, under Form Controls, select Text Box, Check Box, or Combo Box.

To set specific properties for the control, select Options, and then configure the properties that you want.

Note: To create a list of drop-down items in a combo box, select the combo box placeholder, click Options, and then add the items that you want to appear in the drop-down list.

Repeat steps 1 through 3 for each control that you want to add.

Add instructional text (optional)

Instructional text (for example, «Type First Name») in a text box can make your form easier to use. By default, no text appears in a text box, but you can add it.

Select the text box control that you want to add instructional text to.

On the Developer tab, under Form Controls, select Options.

In Default Text, type the instructional text.

Make sure that Fill-in enabled is selected, and then select OK.

Protect the form

On the Developer tab, under Form Controls, select Protect Form.

Note: To unprotect the form and continue editing, click Protect Form again.

Save and close the form.

Test the form (optional)

If you want, you can test the form before you distribute it.

Protect the form.

Reopen the form, fill it out as the user would, and then save a copy.

Creating fillable forms isn’t available in Word for the web.

You can create the form with the desktop version of Word with the instructions in Create a fillable form.

When you save the document and reopen it in Word for the web, you’ll see the changes you made.

support.office.com

Instructions for Use

JOKKE balcony glazing is easy to use. Here are a few tips to make opening and closing the window panes even easier.

OPENING THE FIRST PANE

  1. Start opening the glazing from the edge that has the top lock cord.
  2. Create an access gap of approximately 5 mm between the first and second panes by pushing the sliding windows in opposite directions.
  3. Slide the lower lock in the direction of the arrow, until it is in line with the gap.
  4. Pull gently on the cord to undo the top lock and open the pane.

OPENING THE OTHER PANES

  1. Slide the next pane until it is close to the first open pane.
  2. Place your hand on the edge of the pane, about halfway up.
  3. Push the pane so that it is next to the open pane.
  4. Hold the edge of the pane while opening.

ATTACHING THE PANES TO THE WALL

  1. Turn the desired number of panes open against the side wall.
  2. Place the holder of the cord lock around the lower wheel.

CLOSE THE PANES IN REVERSE ORDER

Remember the access gap when closing the window panes! You can close the access gap by sliding the pane back into its place next to the first pane. The soft gasket on the final pane will seal the gap against the wall.

The top lock�s cord can be shortened temporarily by twisting it upwards and attaching it to the slot on the winder. See picture.

JOKKE BALCONY GLAZING REQUIRES
NO MAINTENANCE

Cleaning is enough.

www.jokke.fi

How to unlock your iPhone for use with a different carrier

Unlocking your iPhone means that you can use it with different carriers.

Your iPhone might be locked to your carrier. Unlocking your iPhone means that you can use it with different carriers. To contact your carrier and unlock your iPhone, use these steps.

If you don’t want to switch carriers and your device is locked because you forgot the passcode, then you don’t need to use the steps in this article. Learn how to reset your passcode.

Apple can’t unlock your iPhone for use with a different carrier. Only your carrier can unlock your iPhone.

Contact your carrier

  1. See if your carrier offers unlocking. Only your carrier can unlock your iPhone.
  2. Contact your carrier and request an unlock. Your account might need to meet requirements for unlocking. After you submit the request, it might take a few days to complete. To get your request’s status, contact your carrier.
  3. After your carrier confirms that they unlocked your iPhone, follow the steps below.

If you have a SIM card from a carrier other than your current carrier

Use these steps to finish unlocking your iPhone:

  1. Remove your SIM card and insert the new one.
  2. Set up your iPhone again.

If you don’t have another SIM card to use

Use these steps to finish unlocking your iPhone:

Get help

You might see this message on your computer or on your iPhone: «The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported carrier store.»

If you see this message, use these steps:

  1. Restore your iPhone to factory settings.
  2. Contact your carrier to make sure that they applied the unlock in their system.
  3. Restore your iPhone from a backup.

support.apple.com

Instructions for use Acaritox

Instructions for Use

Indications for Use

The paradigm endodontic files are intended for removal of dentin and shaping of the root canal. This is to be done by a trained medical professional with typical endodontic procedural methods.

Files are delivered in a clean but non-sterile state. They require sterilization prior to use. Paradigm files contain nickel and should not be used on any individuals that have a known allergy to nickel .

The paradigm files are mechanically driven rotary endodontic files. They should not be used in cases of severe and sudden apical curvatures due to heightened risk of separation.

Caution must be taken with any mechanically driven endodontic rotary system.

Recommended operating parameters are given in the table below. Straight-line access is vital for proper endodontic treatment with paradigm files. Frequent cleaning of the file flutes is recommended during use. Minimal apical pressure is recommended. Endodontic files are single use only, consult instructions before use.

Instructions for Use

  • Create straight-line access .
  • Lubrication using a viscous chelator is important throughout the procedure.
  • Establish a glide path to working length using #10 and #15 hand files.
  • Shape and finish the canal using the crown-down technique to working length using a progression of available sizes, recapitulating with hand files to working length as needed.
  • Disinfect and obturate canals.

www.paradigmendo.com

Instructions For Use

Remove the hologram from the silicone paper backing. Place it on the points as shown on the pictures below. For maximum efficiency drink a lot of water when using the hologram.

When you begin to feel your stress levels increasing or anxiety creeping on, place one hologram on the wrist point shown below. Relief should be felt 10 to 20 minutes after applying the hologram. Each person reacts to the frequencies based on his or her body chemistry.

If more relief is desired place an additional hologram on the opposite wrist point (two holograms total, one on each wrist). The holograms can be removed when you feel calm and relaxed.

The hologram can remain on for up to 24 hours. If additional relief is desired replace the hologram with a new one.

The hologram can be placed in a combination of points. Two on point one (right and left wrist) or two behind the ear (right and left ear), or one on the wrist (point) and the second behind the ear (point)

USE THE Tellus8 FOR A FEW DAYS YOUR BODY WILL ALIGN WITH THE FREQUENCIES

Point 1 can be used on the left or right wrist or both wrists at the same time.

Point 2 can be used on the left or right ear or both ears at the same time.

The hologram is NON- TRANSDERMAL

There are no drugs released from the hologram. There are no side effects from use of the hologram. The hologram contains stress relief and anti-anxiety frequencies without the use of any drugs.

Point 1

If a vertical line is drawn on the palm starting between the ring finger and the pinky finger straight towards the wrist. This point would lie on the line half a thumb-width above the wrist crease

Point 2

Behind the ear and approximately an inch and a half down on the side of the neck.

www.tellus8.com

Share:
No comments

Добавить комментарий

Your e-mail will not be published. All fields are required.

×
Recommend
Adblock
detector